Hey guys,

Thought I'd post up some pics of the seat I started (with help from my Father, thanks Dad!) as I'd never fibre glassed before. So we layed it up in two halves in my wheelbarrow (which I'd prepared with a good poly filler and release wax), then joined the two halves together.

I've fibreglassed in some aluminium flat bars so that I could rivet the seat onto some side support bars. Then I've added a product I found at officeworks, a polystyrene covered with a hard poly surface, cut to shape and sealed with tape to prevent the styrene disappearing.

Found that cutting slots in

the aluminium support plate at the mouth of the seat, meant a better bond with the fibreglass mat.