Is their a slip where I can do my own antifouling?

Enable JavaScript to get the best experience.

Search Subscribed Active Create new topic

Is their a slip where I can do my own antifouling?

> 10 years ago

General

Yoti

2 posts

Yoti

2 posts

9 Feb 2013 5:23am

I am looking for a slip in Sydney Harbour that will slip my Beneteau 40.7 and allow me to work on it. Most slips don't allow this any more. Can anyone recommend an "owner friendly" slip that will help?

Ramona

NSW

7754 posts

Ramona

NSW, 7754 posts

9 Feb 2013 8:34am

Sail down to Greenwell Point.

Watermark

NSW

103 posts

Watermark

NSW, 103 posts

9 Feb 2013 4:30pm

Or you can head up to Lake Macquarie. Marmong Pont Marina has a hard stand area and has no problem with you working on your own boat.

MorningBird

NSW

2707 posts

MorningBird

NSW, 2707 posts

9 Feb 2013 7:39pm

Give Corey at Sirsi Marine in Pittwater a call, 0414 555 533. They have a synchro lift and hard stand. I did my topsides while they did some other work.

mike_e

NSW

71 posts

mike_e

NSW, 71 posts

9 Feb 2013 11:42pm

Noakes or river quays.

cisco

QLD

12365 posts

cisco

QLD, 12365 posts

10 Feb 2013 12:41am

Yoti said...

I am looking for a slip in Sydney Harbour that will slip my Beneteau 40.7 and allow me to work on it. Most slips don't allow this any more. Can anyone recommend an "owner friendly" slip that will help?

Yep!! There is one right next door to the "Restaurant at the End of the Universe".

boatnanny

1 posts

boatnanny

1 posts

10 Feb 2013 6:00am

Balmain Marina allows you to do your own work on the weekends. The staff are around to give advice. You will also find their prices reasonable.

keithw

NSW

190 posts

keithw

NSW, 190 posts

10 Feb 2013 4:07pm

boatnanny said...

Balmain Marina allows you to do your own work on the weekends. The staff are around to give advice. You will also find their prices reasonable.

I've had a survey done at Balmain there service was good parking not bad (park in white street)
Ron Bailey Shipwright & Surveys
Mobile: 0421 087 787

Please Register, or first...

Topics Reply