Cisco gets his "Second Wind"!!

> 10 years ago
Reply
Register to post, see what you've read, and subscribe to topics.
Lazzz
Lazzz
NSW
912 posts
NSW, 912 posts
4 Apr 2014 8:14am
Count me in :)

I've just sold my boat & may not have another real quick so I will be keen.

Actually the bloke who bought it should be taking it back to Cairns about the same time you head north!!
Supersonic27
Supersonic27
NSW
235 posts
NSW, 235 posts
4 Apr 2014 8:23pm
cisco said..

MatM14 said..


If I had know you were around LMYC I would have come said hi. Then I could have invited you out to my boat so you could cast your experienced eye over her and tell me all the things I need to add to the never ending list of jobs. No hang on, on second thoughs maybe that's not such a good idea

Perhaps I will see you and 'Second Wind' out on the Lake before you take her north.

Cheers,

Matt


The trip down to buy her was quite intense and was really something one has to do solo and with sharp focus and no distractions.

I am committed here in Bundy for the next two weeks after which I will break away back to Lake Macquarie at my earliest opportunity and arrive back at the Lake during or just after Easter. There is a day or two's prep work I need to do on the yacht and if any locals could help it will be much appreciated. For instance a trip up the mast is needed to see if the tri light can be made to work again. There is an excellent bosun's chair onboard.





Hey Cisco, I'm down at murwillumbha/tweed river.

I have a set of swaging pliers.....not the real big ones, the smaller set which I use for lifelines, and halyard swages.

I am on leave from 14th April. I can get swaging tool off the boat on the sat or Sunday, or Monday around then.

Happy to loan then to you for a few days./weeks.

And I am actually driving down to Sydney on the wednesday just prior to Easter, for some racing at SASC.

I could drop them off or something!

Rick

If anybody has a large pair of swaging pliers that would be real handy. The lifelines need to be replaced and the last 100 mm of the spare genoa halliard needs to be cut off and re-swaged.

The best thing would be to take her out on the Lake with some fellow Seabreezers onboard and put her through her paces. Heads up Lazzerae. You are back in town now aren't you??? The cockpit is huge and can seat at least half a dozen people.

PM me with available days, phone numbers etc and we will see what we can put together.



cisco
cisco
QLD
12365 posts
QLD, 12365 posts
4 Apr 2014 10:14pm
Supersonic27 said..


Hey Cisco, I'm down at murwillumbha/tweed river.

I have a set of swaging pliers.....not the real big ones, the smaller set which I use for lifelines, and halyard swages.

I am on leave from 14th April. I can get swaging tool off the boat on the sat or Sunday, or Monday around then.

Happy to loan then to you for a few days./weeks.

And I am actually driving down to Sydney on the wednesday just prior to Easter, for some racing at SASC.

I could drop them off or something!

Rick



Thanks for that kind offer Rick. I have a large and a smaller pair here in Bundy. Not sure which I will need yet. I am just trying to avoid lugging them down there on public transport.

I was hoping somebody local at the Lake might have a pair. I will lug mine rather than put you out of your way over Easter. Thank you so much anyway. Cheers Cisco.

HG02
HG02
VIC
5814 posts
VIC, 5814 posts
5 Apr 2014 1:36am
cisco said..

Thanks guys.

@bubble7777
Yes, I bought her from a German couple but the guy pointed out they were also Aboriginal colours. So I suggested I might leave the colours alone so the brudders don't rip me off.

@Ramona
If the propeller gets replaced it will be with an expensive three blade feathering one. Certainly not a two blade flapper. The one that is on there was brand new in November last year so I need to get some use out of it first. Running the engine at 2500 rpm it pushed the yacht along at a good 6 knots by visual estimate.

@HG02
Before I go replacing the almost indestructible Yanmar 2 QM 15 with a three cylinder marinised Kubota, I will perform some of my marine engineering magic on it such as solid mounting it on hardwood blocks, get the injector pump precisely calibrated so the two elements deliver exactly the same amount of fuel each and replace the injector tips so there are no drippy injectors. That should smooth her out.

The Cavalier 28 in Sydney for $18,000 that I also had a look at, had a Kubota 2 cylinder low hours engine in it. We ran it and it was just as lumpy as the 2 cylinder Yanmar. Once you put the idle of the Yanmar up to 1100 rpm, it is fairly smooth.



As you can imagine I am really looking forward to the journey north just after Easter. I am having to nurse my son for two weeks after his tonsillectomy next Tuesday and there is some other prep work to be done for the trip too.

The absolute Gentleman Sailor, Have Fun is sailing to Bundaberg with me and I am working on Morning Bird to come all the way too. Three Seabreezers on the one boat!!! That will be a write up.

We will take plenty of photos and post interesting extracts from the log book. I don't know about posting while we are in passage. We will hug the coast fairly much but I am not sure about mobile internet range.

Any suggestions??

Talk about engine noise we had 4 containers all with V12 gen set we had tidied up over the last few months , they had to be load tested for 7 days straight out exhaust 500 cm exhaust opening at least under full load before they went back on a oil rig to prove them Im glad thats over Cisco. Id rather listen to you Yanmar there a sweet motor used to work on a lot of Yanmar excavators
HG02
HG02
VIC
5814 posts
VIC, 5814 posts
5 Apr 2014 1:44am
Hey Cisco give her a drink of biocide before you leave just in case
HG02
HG02
VIC
5814 posts
VIC, 5814 posts
5 Apr 2014 2:10am
Just the same Cisco Kubota have many uses




cisco
cisco
QLD
12365 posts
QLD, 12365 posts
5 Apr 2014 9:32pm
HG02 said..

Just the same Cisco Kubota have many uses






Looks like vise grips have plenty of uses too.
Disralei
Disralei
NSW
127 posts
NSW, 127 posts
8 Apr 2014 12:00am
Hi Cisco

Congratulations on you purchase of Second Wind, have seen her on the lake a few times. Please for God's sake let me know when you are coming down to the Lake so that I and maybe Matt can catch up with you in this life time, God knows its going fast, lets raft up before you leave have have a session.

Cheers and congrat's, you well deserve each other
cisco
cisco
QLD
12365 posts
QLD, 12365 posts
8 Apr 2014 3:59pm
I will be back at the Lake today week 14:00 hrs and intend putting her alongside at LMYC. Good opportunity for a sherbet.

PM me your phone number.
Poodle
Poodle
WA
868 posts
WA, 868 posts
8 Apr 2014 4:06pm
Congrats on the new ride Cisco. Will we see a few cruising gopro vids
cisco
cisco
QLD
12365 posts
QLD, 12365 posts
8 Apr 2014 10:38pm
Poodle said..

Congrats on the new ride Cisco. Will we see a few cruising gopro vids


Thanks Poods. Ain't got a gopro yet. An EPIRB is at the top of the list.

She is now registered in Qld, $300.50 annually (ouch), third party property insured with APIA, $117 annually or $9.75 monthly and I have a mooring licence in the Burnett River issued, $75 application fee and an outrageous $47 annually to keep current.

Just have to get down and out of that river at the first hint of a flood.

There will be a write up and photos of the trip north. Depending on mobile reception we may be able to do it on the run but if not afterwards.

HaveFun and Morning Bird have graciously tossed their hats in the ring and Easter Monday is our planned date of departure.

A few of the Seabreeze crew who live near the beautiful Lake Macquarie have generously offered assistance in the preparation and I am anticipating that we will have a sail on the Lake on Easter Saturday or Sunday.

Might have to buy a bottle of Sailor Jerry's rum for the occasion.
HG02
HG02
VIC
5814 posts
VIC, 5814 posts
8 Apr 2014 10:48pm
cisco said..

Poodle said..

Congrats on the new ride Cisco. Will we see a few cruising gopro vids


Thanks Poods. Ain't got a gopro yet. An EPIRB is at the top of the list.

She is now registered in Qld, $300.50 annually (ouch), third party property insured with APIA, $117 annually or $9.75 monthly and I have a mooring licence in the Burnett River issued, $75 application fee and an outrageous $47 annually to keep current.

Just have to get down and out of that river at the first hint of a flood.

There will be a write up and photos of the trip north. Depending on mobile reception we may be able to do it on the run but if not afterwards.

HaveFun and Morning Bird have graciously tossed their hats in the ring and Easter Monday is our planned date of departure.

A few of the Seabreeze crew who live near the beautiful Lake Macquarie have generously offered assistance in the preparation and I am anticipating that we will have a sail on the Lake on Easter Saturday or Sunday.

Might have to buy a bottle of Sailor Jerry's rum for the occasion.


Thanks for the APIA insurance did not kn ow they did boats
Good luck and enjoy the journey Cisco
Please Register, or first...
Topics Subscribe Reply

Return To Classic site 😭
Or... let us know if a problem, so we can tweak! 😅