Gorgo said..
Just as an aside, the Flysurfer kites have always had overly complicated bridles and a poor depower system.
High end paragliders are going to 2 and 3 line (2 or 3 rows of bridle lines). The kites I used were 2-3 line kites 10 years ago. Flysurfer still use complicated, multi-row bridle systems.
In recent years several paraglider manufacturers have brought out single skin, light weight wings. They're light and simple and the performance is greatly reduced compared to a fully functional double-skin wing. I would be pleasantly surprised if the Flysurfer Peak offered more than basic performance compared to a double skin wing.
Ah, the bridle-line-phobics raise their ugly heads

What kind of paraglider? In the videos where I've noticed, they've had A, B, C, D and brake (or Z) rows like in the pic below... that's 5 rows to the 4 on the Speed3s. On other PGs, I've seen 4 rows... those seemed more sporty. Speed3 uses ABCZ bridles, the smaller Speed4 ABZ.

Poor depower?

Pull the other one!
You know that you just lay the kite out, then jiggle the lines a bit to flap out the tangles in the bridles...? Like untangling LEI lines and (gasp!) bridles, don't go whaling away on them to get knots or tangles out, gently jiggle them.
Set up a Flysurfer... unroll parallel to the wind, fold over a wing tip, dump sand on it. What's hard about that?

And... there's video around of a guy water relaunching a peak.
T84__
Much more fragile? Nonsense. Differently fragile, perhaps... and don't forget, I've never had a leaking bladder on any of my foils ;)
...
Long story short, either you like 'em and can live with the quirks, or you don't and you have to live with LEI quirks.
Personally, I fly both LEI and Flysurfer foils. And have had arcs. And still have some fixed bridles...