I have purchased a boat that was in need of a lot of work. I have finished most of the interior and most of the big and little issues. The boat sails well and is water tight. I recently spent three full days on the water with a cup full of water coming out of the bung at the end so I am happy with that.

I am at the point of removing the Anti foil paint from the bottom as it is pretty worn and will be repainting with 2 pac. As this is a Trailer Boat I have been told it is the best idea.

I am using a orbital sander with 80 grit paper and sometimes 60 grit but it seems to be taking a lot of time and effort to remove from the fibreglass hull. I also so have a few Blisters to fix which is why I want to do this now.

The trailer has too many parts that make it hard to get too so I have taken the boat off and have put it on a bit of an angle so I can get to one side at a time.

Is this the best way to go or is there some secret apart from paying someone to do it for me.