the trailing edge of my 8m rpm is paper thin, need to have the whole thing replaced anyone had any luck with this and cost wise is it even worth it cheers

Anybody got good ideas on DIY kite and gear repairs.

Just completed repairs on a kite I bought for next to nothing whose trailing edge was overworked big time. I bought a couple.of meterers of sticky back Dacron at about $20 per meter (1.5m wide), cut pieces out at about 180mm wide and the length the same as the width of.each panel. Used masking tape.to regidize the frail.material and carefully stuck each panel.down check.for creases and rinkle. Then used tent seam sealing glue toglue down corner etc.