Here is an Aluminium Mast made in France by Serfiac
It has an outside diameter of 51mm 1.2mm wall thickness at the base and 24mm
OD at the tip 2.4mm wall thickness
The mast is parallel for 2.3 metres and then tapers down to the 24mm tip diameter
The mast balances at the centre 2.3 Metre point where it starts to taper
It has a weight of 2.4KG and written on it is stiffness 7.2
My questions are : How suitable is this mast for a mini ?
Would I be able to make it into a three piece ?
How would it be made? It seems to get thicker toward the tip and also seems to have a seam running along the inside the full length
Cheers Hiko