Hi all, just finished a new board. 114x45cm from a 19mm pawlonia blank. Kerfed the nose rocker with a handsaw (the lines on the nose at the top and the rail, and you can see the bends in the underside of the nose too. Otherwise it's dead flat. Glassed with 6oz top and bottom, lapped at the rails, and a patch top and bottom at the mast mount. Used Surfset Flex epoxy. Put an extra set of mounting plugs (resin and q-cell) in, in case I want to move the foil forward for some reason. Low tech tools and materials. Weighs just under 3kg, volume should be about 10l, so well able to float a foil. It's very stiff, due to thicker core. The original shinnster that I've been using till now is way too flexy. Hopefully get a ride in and report back this week.