91 posts
Hi!
Can anyone advise me on the Sl Carbon art board is compared to Fanatic Falcons?
Is it worth to change quiver from Falcon to Carbon Art.
Thanks,
Dani.
201 posts
In brief, pugwash is right.
By sure Carbon Art boards have simple, refined shapes and are extremely well built.
Should I build my slalom quiver from scratch, I wouldn't have the slightest doubt; honestly though, as you already have a set of boards, I'd say you should test. When/if you do, please don't just fit the CA's with the same fins you use on the Falcons; as each board model needs specific fins in order to deliver its best. So rather test a CA (as any other board) with the fin the owner selected.
I say this because '12 CA's need much different fins compared to '11 ones, in my view. But once properly outfitted, their performances are astonishing.
91 posts
Thanks, Pugwash and geoITA.
Hi geoITA what do you mean by try it with a different fins than what i used with Falcons? Most of my fins are by Vector fins. Volts, SL weed, Delta, and Canefire.
Thanks for the help.
Dani.
201 posts
Hi DaniS,
OK you asked for it!
My first CA was a '08 SL58. Used it with Deboichet SL2 at first, but felt too sticky. Then I started using with Tectonics Falcon 32 and 34 (for 6.3, 7.0) and was much nicer, easier, looser.
In '09 I bought a 55 and was OK with same fins, smaller sails: the 32 with 5.9, 34 with 6.6. In '10 I got a 58 again, same fins but mostly 32 for 6.3, 34 for 7.0. With the '11 58 those same fins felt smallish and I used the 34 most of time, a few times also a 36 for 7.0. Now I have a '12 58. Started using with the Falcons, but even the 32 felt way too big (too much lift) for the 7.0! The '12 model has so much lift, I was never able to have a decent control on it using the soft Falcon fins. Now I have a 31 Vector carbon Rockit to test and I hope and believe that one will solve the control issue.
Medium wind, kind of the same. Started with a truly great '09 62 probably the board I loved the most. Mostly used it with a 38 Tomcat, with 7.0 and 7.6 (6.6 too at times); not much fin sensible, I'd say. Then I got a set of Talons and was OK with the 40.
The '10 SL66 was very nice with 7.6 and 38 or 40 Talons, 42 too in very light stuff; but never really liked it with a 7.0. The '11 66 instead had great control in messy chop and overpowered, but asked for more fin: a 38 Talon was extremely nice with a fully powered 7.0, 40 felt smallish with 7.6 and the Talons generally felt not enough powerful (probably a Vector Volt would be OK on that size and vintage).
I ordered a set of Sonntag SL-P fins for the '11 boards and received those at season end. On the '11 models actually felt very nice, more powerful but easier through chop than the Talon's.
The '12 SL66 was changed and is a fury: same as the 58, it has plenty of lift and terrific accelleration. The flexy, powerful carbon SL-P's were impossible to use on that one once powered up. With 7.0, I started trying with 37 SL-P, went down immediately to 34 and that worked only when just 'nicely' powered; in the end I tested again the Talon 36 and unexpectedly (SL-P's were easier on '11 board!) it was a lot better.
The last session I had on the 66 was in terribly messy waters, crossed waves (it was about 20 + knots onshore Southerly wind a few hours after a 25 knots SW), with 7.0. At first I tried the 36 Talon but didn't even dare to sheet in and use my harness on the (hardest) port tack; then I fitted a 35 Vector carbon Rockit: at last it was perfect, with incredible control and incredible performances. I was astonished at how the board's behaviour changed. I am buying that fin, plus a 37 for the 7.6 and the 31 fr the SL58.
Actually I didn't test the SL78 enough, but I think I will use the 42, 44 and maybe 46 Talons on that one. I also have a (rather soft) 46 carbon Canefire and that one is for super light winds, as it proved way too lifty on former '11 75. I am selling all of my SL-P's (34, 37, 40, 43, 46) as have way too much lift for the '12 boards that I am NOT going to change this time.
NSW
76 posts
I did the change over from a Freeride board to a CA SL70 back in 2010 (power up the DeLorean Doc'). Sailed a mates 125l Falcon at the time as part of the decision making process and personally found the CA much easier to sail - and gybe in particular. Volume distribution and the clean shape and rails of the CA just seem to work.
In terms of the buying decision I spent a lot of time on email with James Dinnis at CA to work out what to get. Use the "get in contact" button on the CA website as their knowledge is amazing. When I told him what and where I was sailing and he recommended a 20l smaller board I thought he was smokin' cr@ck! My time on water has got a whole lot better as a result - the guy knows his stuff.
201 posts
DaniS,
you will love that board!
After all my previous writing I forgot my personal conclusion. Fin choice may vary (a lot!!!) even between different vintages of apparntly similar designs, go figure when changing brands. About '12 CA SL's: in my experience those boards require stiff fins with very low lift. As I said, the Talons are a decent choice; as possible alternatives (possibly better) I'd suggest to look for Tectonics T-43, Vector Alpha, VX/Vulcan or Rockit or probably the C3 fins that James uses himself. I don't expect powerful fins such as the Vector Volt or Canefire to perform decently control wise on '12 CA's once well powered up (unless your ones are moulded ones in extra stiff construction).
201 posts
Wow in red it's gorgeous!
91 posts
Nice board firiebob;-)
Geo, i think i will check the Vector Rocket or Alpha.
Thanks,
Dani.
91 posts
Hi geoITA and firiebob!
Do you think the CA SL 55 will be good for my weight?
I am 63 Kg 162 height.
or should i should go with different size?
I was planing to get the 55 than build up to 62 after that.
Thanks for all the help.
Dani.
201 posts
Hi DaniS,
I had a 55 and a 62 in '09 and '10, both boards were super and sizes rightly spaced, actually I sold the 55 only few months ago. For me (6'3", 85 kg) such sizes were a bit small, so I think should be right for you.
91 posts
Thanks firiebob and geoITA.
I am ordering the Sl 55 thank the 62.
Regards,
Dani.
NSW
956 posts
Are you having the cocktail to celebrate the new boards arrival?
