Best bag for GT31

> 10 years ago
Reply
Register to post, see what you've read, and subscribe to topics.
Ellobuddha
Ellobuddha
NSW
625 posts
NSW, 625 posts
8 Jul 2010 8:00pm
Hi guys,

About to buy a GT31 and I am after your opinion on the best waterproof bag for them. Not only obviously waterproofing but comfort on arm etc etc. Any suggestions most appreciated as Ive seen there are a fair few being used.

Thanks your your assitance.

EB
izaak
izaak
TAS
2013 posts
TAS, 2013 posts
8 Jul 2010 8:04pm
tried a few and this is the go www.paqua.com.au/paqua_range.htm#MIDI the midi $34 one
Mobydisc
Mobydisc
NSW
9029 posts
NSW, 9029 posts
8 Jul 2010 8:18pm
Yeah the Pacaqua midi is quite good. I've had one for a couple of years and its still going strong. I bought mine from Whitworths. They sell online.

The only problem I've had is when stacking and the velcro coming loose around my arm, with the pack and the GPS floating off. I think some people secure the pack with some electrical tape to secure the pack.


jamesf
jamesf
NSW
1003 posts
NSW, 1003 posts
8 Jul 2010 9:42pm
Mobydisc said...

Yeah the Pacaqua midi is quite good. I've had one for a couple of years and its still going strong. I bought mine from Whitworths. They sell online.

The only problem I've had is when stacking and the velcro coming loose around my arm, with the pack and the GPS floating off. I think some people secure the pack with some electrical tape to secure the pack.





I pinched a big safety pin from my wifes sewing box and put it through both halves of the strap to keep it together.

Only problem I have had with the paqua (maybe also a problem with other brands) is its nearly impossible to use the little GT31 joystick. I think someone posted once something about using a lego wheel to fix it? Would appreciate it if anyone has tips on that.

cheers
james
decrepit
decrepit
WA
12873 posts
WA, 12873 posts
8 Jul 2010 8:06pm
I use the rubber washer from a roofing screw, the hole is conical but a tad small, you just have to ream it out slightly, so it fits over the joystick. It then won't come off and get lost, but allows full use of the stick without accidentally pressing in.

And agree the paqua midi is the best I've used. I have a cord tied at the top of the pack and looped around my arm, with a tightening toggle.
I've never had the velcro come loose, my only criticism is the length of the strap, I'm tempted to cut about 5cm off mine.
pedro e
pedro e
VIC
257 posts
VIC, 257 posts
8 Jul 2010 10:11pm
I can also recommend Kato's homemade cases which are very robust and waterproof. Pretty sure he has posted photos of them here in the past. Send him a PM and he'd arrange posting you one I'm sure.
windaddict
windaddict
VIC
1121 posts
VIC, 1121 posts
9 Jul 2010 9:18am
Can the GT31 measure height? ie for jumping?
yoyo
yoyo
WA
1646 posts
WA, 1646 posts
9 Jul 2010 10:53am
The Paqua midi seems the best value option.



www.whitworths.com.au/

GPS vertical measurement is quite poor compared to lateral measurements. If you plot your tracks in 3D on dead flat water (behind a sand bar for example) it is not uncommon to see the altitude vary from + to minus 9 metres from sea level.
Ellobuddha
Ellobuddha
NSW
625 posts
NSW, 625 posts
10 Jul 2010 3:45am
Thanks for the help guys. Paqua ordered and on its way.
echunda
echunda
VIC
765 posts
VIC, 765 posts
10 Jul 2010 10:11pm
pedro e said...

I can also recommend Kato's homemade cases which are very robust and waterproof. Pretty sure he has posted photos of them here in the past. Send him a PM and he'd arrange posting you one I'm sure.


+1 From me.

Kato's case is great
Bristol
Bristol
ACT
347 posts
ACT, 347 posts
11 Jul 2010 10:50am
jamesf said...
Only problem I have had with the paqua (maybe also a problem with other brands) is its nearly impossible to use the little GT31 joystick.


I suspect that you want to stop the joystick from changing the display mode whilst you're on the water. Example: you want the "speed genie" to stay displayed.

Are you aware that you can software-lock the joystick? To do this, hold the joystick down for about 3 seconds. "Key locked" will be displayed. Lock the joystick after you've brought up the display you want.

To unlock, same process.

This also works on a GT11 if you've updated the firmware.

As for EB's original question, I use one of JP747's H2OTek packs, and am very happy with that.
Please Register, or first...
Topics Subscribe Reply

Return To Classic site 😭
Or... let us know if a problem, so we can tweak! 😅