Point 7 Sails

> 10 years ago
Reply
Register to post, see what you've read, and subscribe to topics.
echunda
echunda
VIC
765 posts
VIC, 765 posts
18 May 2011 1:37pm
Before any Inverloch Windsurfing Club member pipes up...

Yes, I know I'm having a kid soon,

Yes, Megs WILL be sailing more than me

BUT, I want to know more about Point 7 sails other than what I've read in the UK Windsurfing Mag tests.

Has anyone got one?

If so, how do they sail and are they durable.

Is there demo sails in Australia?

I LOVE the look of these sails, they're ace in my books and I'm thinking of buying one in the near future but I'd rather demo them before I buy (cam vs no cam)

Any advise or pointers would be greatly appreciated.
Ben 555
Ben 555
NSW
456 posts
NSW, 456 posts
18 May 2011 1:54pm
try Board crazy Belmont NSW - they are the importers
ejmack
ejmack
VIC
1308 posts
VIC, 1308 posts
18 May 2011 2:51pm
Hey George,

I can't comment on the sails - know nothing about them besides the fact they mostly seem to be black. Is that a bad thing, no idea. Your probably going to have to upgrade your mast if buying so factor that into your decision also - make sure you get the right spec mast for the sail. Also, I wouldn't rush into a cambered sail too quickly. I think you sail mostly at Inverloch so imho your better off with a non cambered until your ready. Others might say differently but I reckon you'll have more fun and actually go faster on most days down there than those on cambered (I've seen a lot of people struggling with them at Invy, especially with the strong current and chop). Just my opinion. And seeing as megs will be using it more than you it'll be much easier for her to rig and use
sausage
sausage
QLD
4874 posts
QLD, 4874 posts
18 May 2011 4:48pm
I think Sean O'Brien sailed them for a couple of seasons (or still does??) PM him. I think his log in is AUS120 or something like that.
nbr
nbr
QLD
298 posts
nbr nbr
QLD, 298 posts
18 May 2011 5:24pm
A recent english wind surfing mag,it may have been Boards did a comparison between a cammed Point 7 and a non cammed and came up with a very suprising result.
Hooksey
Hooksey
WA
558 posts
WA, 558 posts
18 May 2011 6:54pm
nbr said...

A recent english wind surfing mag,it may have been Boards did a comparison between a cammed Point 7 and a non cammed and came up with a very suprising result.


.... what were the results (just in general terms)??
Bluedog76
Bluedog76
249 posts
249 posts
18 May 2011 7:13pm
I brought an 8.7m a few months ago. Goes great. Huge range. Would like to try it out in less than 20-25knots though. At 75kg it was a handfull but surprising controllable (relatively). I think it looks really cool also, at least I feel cooler.
Waiting4wind
Waiting4wind
NSW
1871 posts
NSW, 1871 posts
18 May 2011 11:04pm
Bluedog76 said...

I brought an 8.7m a few months ago. Goes great. Huge range. Would like to try it out in less than 20-25knots though. At 75kg it was a handfull but surprising controllable (relatively). I think it looks really cool also, at least I feel cooler.


You'll have to get one of the Black Exocet Slalom boards to match the sail, for a completely cool look!
Krisiz1
Krisiz1
WA
331 posts
WA, 331 posts
18 May 2011 9:36pm
I bought a 4.7 a couple of years ago. It seems great to me! The best thing about it is that it is black with a silhouette of a woman on it!
SeanAUS120
SeanAUS120
QLD
769 posts
QLD, 769 posts
19 May 2011 1:55am
Hi guys,

Yep, I'm riding P7 still ... also working for them ;-)

You'll like the durability on them. The black monofilm isn't just for looks; we have a slightly thicker film than other brands which is a bit more resistant to crinkles (from rigging) and is 100% UV resistant, so it won't get brittle and crack after years in the sun. The orange film in the window is also 100% UV resistant.

I think you'll find our sails are a touch heavier than some others on the market, but generally its cause everything is super reinforced and the materials are much more heavy-duty. End result: they last longer.

As for masts... best to have the P7 ones, but if you already have either a North or a Gun Sails mast, they are the closest in bend and you could get away with it.

To be honest, the no-cam sails (AC-X) rock! I'd stick to them unless you are trying to get a lot of top-end control out of your sail or want to race...

Not sure what BoardCrazy (boardcrazy.com.au - the site is down at the moment I just noticed) have in stock but PM me if you have any questions as I helped develop a lot of the current range :-)
nbr
nbr
QLD
298 posts
nbr nbr
QLD, 298 posts
19 May 2011 9:17am
The January Boards mini test basicly put the ACX ahead of the ACK in most instances except for top end stability and extreme reaching and also stated that you would need an extra 1/2 meter bigger sail to get the same power from the cammed sail.Over all the no cam scored 7 points over the cammed sail which scored 3.
echunda
echunda
VIC
765 posts
VIC, 765 posts
19 May 2011 10:36am
Waiting4wind said...

Bluedog76 said...

I brought an 8.7m a few months ago. Goes great. Huge range. Would like to try it out in less than 20-25knots though. At 75kg it was a handfull but surprising controllable (relatively). I think it looks really cool also, at least I feel cooler.


You'll have to get one of the Black Exocet Slalom boards to match the sail, for a completely cool look!


Those Black excocets hardens my mast... dead set awesome boards!

Why is it that Vic only have JP, NP and starboard as the main brands available?

I'd love to see P7 and exocet down here.

Hmmmm.... there might be a business plan in there.........
nbr
nbr
QLD
298 posts
nbr nbr
QLD, 298 posts
19 May 2011 10:55am
Carbon Art are putting out the best black beasts.
Waiting4wind
Waiting4wind
NSW
1871 posts
NSW, 1871 posts
19 May 2011 7:10pm
echunda said...
Those Black excocets hardens my mast... dead set awesome boards!

Why is it that Vic only have JP, NP and starboard as the main brands available?

I'd love to see P7 and exocet down here.

Hmmmm.... there might be a business plan in there.........


I did see a pic somewhere of Mr Obrien on a black Exocet Formula board with point 7 sail....looked very nice

But the SB full carbon is not a bad looking combo with the P7 either.

Havent seen a alack CA as yet.
SeanAUS120
SeanAUS120
QLD
769 posts
QLD, 769 posts
20 May 2011 1:35am
I haven't seen a black CA board... would be cool...

That photo on the Exo was here - seanobrien.com.au/windsurf/sydney-harbour-fw-photoshoot/

Definitely want to try and hookup a black board to go with the black sails; looks legit ;-)

I'm on Starboard now so I had to pick the darkest carbon finish on the iSonics to get the best look... haha.

Interesting about the test results on the AC-X... it's an amazing sail, but I also think the AC-K (3-cam) is too if you want a bit more top end. Bought one for my Dad recently and he's loving it.
nbr
nbr
QLD
298 posts
nbr nbr
QLD, 298 posts
20 May 2011 6:50am


here is a picture of Mr Carbon Art at the NZ Nationals with his biack beast.
echunda
echunda
VIC
765 posts
VIC, 765 posts
20 May 2011 11:23am
I'd love to have a carbon board with just clear coat. That would be ace.

I remember being at the formula serise at Jervis bay last year and there was a 'dude' there with a point 7 sail and black excocet board on the water. He didn't win but he looked cool...... and that's gotta count for something.

But back on the sails though... My main issue is that there's no way of testing which sail is suitable for me. Cam or no cam

Do you have the pic of the 4.7 with the chick bending over??

Please Register, or first...
Topics Subscribe Reply

Return To Classic site 😭
Or... let us know if a problem, so we can tweak! 😅