Hey everybody. I've been researching this problem for a while and I'm surprised I have not be able to find an answer to what I think is a seemingly simple problem. I have a old bic windsurf board that has a significant crack along the siderail and bottom. It actually feel from it's storage position on my porch and hit the grill. I know, I know. It was a dumb move. Anyway, I can find videos and instructions on how to fix fiberglass boards all day long, but I have not been able to find anything on how to fix this board. I'm actually not even sure what type of material the board is. I can see the core is some type of styrofoam, but I'm pretty sure the outer shell is NOT fiberglass. Can someone here point me in the right direction? It's way too nice out for me to NOT be on the water!! Thanks in advance.

Angle grinder will help it fit in wheelie bin!!!

Looks like an old BIC 250 by the shape of the back end. They are a Plastic injected molded board. Fibreglass should fix the problem quite well.
Nothing wrong with sailing the oldies. But might be cheaper to find another newer board in your local trading post over there. The fibreglass might be worth more than a newer board in the end if you decide to fix the problem.

deejay8204 said..
Looks like an old BIC 250 by the shape of the back end. They are a Plastic injected molded board. Fibreglass should fix the problem quite well.

Nothing wrong with sailing the oldies. But might be cheaper to find another newer board in your local trading post over there. The fibreglass might be worth more than a newer board in the end if you decide to fix the problem.

Getting fibreglass to stick to that plastic is near on impossible.

Take it to a plastic welding mob shoudent cost the earth google them or use the yellow pages

Go to your local recycle centre and you should be able to do a swap for an undamaged one . Seriously the trouble and cost is not worth the board. You can pick up something similar for less than $50 in fact most likely free .If you were in Victoria I would give you mine .

claw said..

This stuff works!!

This is just epoxy. Using the cleaner on the eps core makes the decision to throw away the board a lot EASIER.