Boom Mount on Queens Lake

> 10 years ago
Reply
Register to post, see what you've read, and subscribe to topics.
PhilSWR
PhilSWR
NSW
1104 posts
NSW, 1104 posts
7 Dec 2013 11:34am
Been looking at ways to mount a camera whilst sailing and got our local fabricator to create this contraption. It's loosly based on the clever camera mounting system called a Clew View. Anyway, it's stong and simple and didn't shake around too much which surprised me. Here it's mayden voyage at Queens Lake near Port Macquarie yesterday. Definitly needs a good ocean blast- hopefully tomorrow on Trial Bay Curious to hear what people think of the camera angle.

PS- The camera was fully teathered to boom, and used the Gopro floaty back door.



Brewman
Brewman
NSW
48 posts
NSW, 48 posts
7 Dec 2013 12:34pm
Great camera angle, gives a good look at where you are heading and what you are doing.
The first thing that popped into my mind when I saw your picture was "keep those metal corners away from the board". Maybe some insertion rubber and contact adhesive would soften any blows - just throwing it out there
PhilSWR
PhilSWR
NSW
1104 posts
NSW, 1104 posts
7 Dec 2013 1:47pm
Thanks Brewman, and a good point. Actually, I tried to see if it would touches the board, buts it's well clear no matter how hard you try. Probably not well clear of the sailor though. Softer corners coming up
elmo
elmo
WA
8890 posts
WA, 8890 posts
7 Dec 2013 11:15am
Some garden hose (neighbors, if you don't like them) split and some silastic will make a good edge protection
Reflex Films
Reflex Films
WA
1460 posts
WA, 1460 posts
7 Dec 2013 11:33am
its a cool angle - and some good sensation of speed - but the edit is about 2 minutes 2 long for a 1 shot edit.

you really only want to use a go pro shot as a quick cutaway shot if possible - after about 5 seconds the impact of the shot falls off exponentially.

try also mounting it to a pole/channel marker in the water or have some one hand hold it as you sail past in shallow water to mix up the angles a bit

- in short - dont be afraid to use it as a conventional camera (go for medium view mode sail past it really closely!) as well as a mounted shot.

Go pros are also great as super fast set up timelapse cameras too.

I find myself using my go pro more in a conventional style as an easy set up wide angle shot - than going for fancy mounts.

It is a very cool angle - just needs to be used in moderation.



raftcrew
raftcrew
NSW
31 posts
NSW, 31 posts
7 Dec 2013 3:36pm
Phil, looking awesome mate! Cant wait to see that angle at Trial Bay with a jump or two and a wave ride!!
mineral1
mineral1
WA
4564 posts
WA, 4564 posts
7 Dec 2013 1:02pm
Phil, exelent idea to assist those learning to carve gybe. A few where the gybe went wrong, its easy to see that the foot work on intitial pressure, rear foot on outside rail went bung, and the gybe went to sh1t.
Those that did work, your foot placement was near enough to exact each time. That being more to outer edge and in right position front to rear. The stance on each, also changed for those that went bung. Thanks for posting
dweller
dweller
NSW
134 posts
NSW, 134 posts
7 Dec 2013 4:09pm
I tried something similar but it weighed to much. Tempted to make one out of carbon but never got round to it









shear tip
shear tip
NSW
1125 posts
NSW, 1125 posts
7 Dec 2013 4:47pm
It's a great angle Phil! (but it pains me to see footstraps set inboard on a Futura )
GusTee
GusTee
NSW
266 posts
NSW, 266 posts
7 Dec 2013 5:11pm
Phil, nice vids, enjoyed all you've put up so far. The angle is really good as one can see where you're heading as well as sailing technique. Some shots had a headless torso, no big deal. Music was a bit aggro for a nice cruisey sail. It would fit if you we're caught out on a 8m in 25+knots hanging on for dear life .
NotWal
NotWal
QLD
7436 posts
QLD, 7436 posts
7 Dec 2013 4:13pm
Trial Bay looks bloody lovely.

Nice vid but the music is hands off torture.
MartinF2
MartinF2
QLD
484 posts
QLD, 484 posts
7 Dec 2013 6:14pm
Don't you hate it when your harness lines somehow hook you back up mid gybe........

Great work Phil and keep them coming.
Cheers
Marty
AJEaster
AJEaster
NSW
698 posts
NSW, 698 posts
7 Dec 2013 11:11pm
love the angle Phil
PhilSWR
PhilSWR
NSW
1104 posts
NSW, 1104 posts
8 Dec 2013 1:37am
Cheers for the feedback :) I'm pretty happy with the angle- if only to see what your feet actually do, and any mistakes you make on the day. There's a bit of swing weight but you soon forget the thing is there when you're up and running. Hanging to take it jumping on the ocean. Fingers crossed for a decent n-easter tomoz.

And well spotted Marty on the re-hooked harness line! Ruined the best gybe of the day...

Cheers
WaynoB
WaynoB
NSW
393 posts
NSW, 393 posts
13 Dec 2013 11:52am
Hi Phil,

I like the angle/view from the back of the boom. Is the swing weight an issue?

Guess you did not want to try the GoPro Handlebar attachment which is why you got one made...or is it the cost?

I have used my GoPro mostly on the helmet which has been good mostly except for when I get bounced around, but am going to buy a handlebar mount for Xmas and give it a try on the end of the boom.

Cheers.
PhilSWR
PhilSWR
NSW
1104 posts
NSW, 1104 posts
13 Dec 2013 12:18pm
Hi Wayno.

There's definite some swing weight there. I took it for a run in the ocean a few days ago and found it tough on my dodgy gybes. Just a combo of un-even water surface and some extra outer weight I guess.

I tried the handle bar claps on the side of the boom one day at Queens, but didn't like the view showing only one side. And I couldn't work out how to soundly mount it right at the end off the boom- so I had the bracket made up. This rear mount (set low and back) I feel shows both sides nicely- and is build like a brick outhouse!

PS- Do you have any links to your footage? Always keen to see people sailing

Please Register, or first...
Topics Subscribe Reply

Return To Classic site 😭
Or... let us know if a problem, so we can tweak! 😅