Fin Shims - the solution to a sloppy box!

> 10 years ago
Reply
Register to post, see what you've read, and subscribe to topics.
Simondo
Simondo
VIC
8025 posts
VIC, 8025 posts
2 Dec 2012 5:17pm
All jokes aside, regarding sloppy boxes!!

The el-cheapo solution is just layers of Electrical Tape on the sides of the base of the fin... But you only get 1 shot at it. For a tight fit, the tape gets a little squished, so if you pull it back out for a second go, you need to re-do some tape...

So you need to know what position you want the fin, and have the plate carefully positioned... or use a "fabricated paper clip" to help position the plate... or similar...

I have a board with the SLOPPIEST BOX EVER!!! 3-4 layers of tape on each side.

PS - it's not a McTavish... All my McTavish boards have top quality fin boxes which are absolute perfect fits for the fins.
laceys lane
laceys lane
QLD
19804 posts
QLD, 19804 posts
2 Dec 2012 4:26pm
mctavish fin boxes have nothing to do with it. it depends on the fin and brand etc etc more than anything.

bloody mct pimps
McHenry
McHenry
SA
1739 posts
SA, 1739 posts
2 Dec 2012 5:03pm
Cut a coke can up and wrap it around the base of the fin, or go to KFC and get a plastic straw and cut it in half, both ways work a treat!!
SP
SP
10982 posts
SP SP
10982 posts
2 Dec 2012 2:41pm
McHenry said...
Cut a coke can up and wrap it around the base of the fin, or go to KFC and get a plastic straw and cut it in half, both ways work a treat!!


Straws and match sticks, longboarders best friends... The inside of a pen works good to....

But usually it's whatever stick I can find laying around in the carpark

62mac
62mac
WA
24860 posts
WA, 24860 posts
2 Dec 2012 2:41pm
Crap fin take it back to Kmart for a refund.I've never had this issue but all my fins are hand made by WIZ from McTavish fame.
SP
SP
10982 posts
SP SP
10982 posts
2 Dec 2012 2:44pm
62mac said...
Crap fin take it back to Kmart for a refund.I've never had this issue but all my fins are hand made by WIZ from McTavish fame.


Actually the simple answer is... it's different box manufacturers. US boxes are typically shallower and slightly narrower. Therefore US fin manufacturer are usually a bit thin and don't quite fit right in boards made in Oz.
62mac
62mac
WA
24860 posts
WA, 24860 posts
2 Dec 2012 2:45pm
Quality you want go Mc
SP
SP
10982 posts
SP SP
10982 posts
2 Dec 2012 2:47pm
62mac said...
Quality you want go Mc


....
sepirott
sepirott
NSW
336 posts
NSW, 336 posts
2 Dec 2012 5:54pm
I just cut up a the guts of a plastic softdrink bottle (2 litre is best) in strips to put on one side of the fin (about 10cm x 2cm) or if fin is really loose I cut it wide enough to go under the fin and up both sides, easy as. Sometimes I just put a single strip on both sides. I think most of my boards have a strip in the fin box.
Ted the Kiwi
Ted the Kiwi
NSW
14256 posts
NSW, 14256 posts
2 Dec 2012 6:26pm
Use some of the expanding dentist tape - Sharpie will know what its called....it works a treat. Alternatively just glass a few layers onto the fin at the base and problem solved. Should only take ya about 2 mins and another 2mins to finish it nicely....then you never have to worry about it again.

obct
obct
NSW
3487 posts
NSW, 3487 posts
2 Dec 2012 6:35pm
and if all else fails, you could scratch around the back of the lounge chair for lose change and once you have $1, you can pop out and buy a packet of the real thing.




I actually find them more useful at the side of the fin rather than the base.
Simondo
Simondo
VIC
8025 posts
VIC, 8025 posts
2 Dec 2012 6:36pm
McHenry said...
Cut a coke can up and wrap it around the base of the fin, or go to KFC and get a plastic straw and cut it in half, both ways work a treat!!


Yeah, drinking straws... You could even do short lengths in the "U" shape under the fins...

Interesting... options!
Ted the Kiwi
Ted the Kiwi
NSW
14256 posts
NSW, 14256 posts
2 Dec 2012 6:39pm
obct said...
and if all else fails, you could scratch around the back of the lounge chair for lose change and once you have $1, you can pop out and buy a packet of the real thing.




I actually find them more useful at the side of the fin rather than the base.


Do they any other uses OB? I like the way they word their product........
obct
obct
NSW
3487 posts
NSW, 3487 posts
2 Dec 2012 6:54pm
You know what's a hoot.

Read all the instructions and every time you see the word "fin" replace it with "dick".



Ps. I just realised, that's heterosexual smut, yippee, I in front by 2 now

laceys lane
laceys lane
QLD
19804 posts
QLD, 19804 posts
2 Dec 2012 8:08pm
obct said...
You know what's a hoot.

Read all the instructions and every time you see the word "fin" replace it with "dick".



Ps. I just realised, that's heterosexual smut, yippee, I in front by 2 now





and not a dogs dick to be licked
Please Register, or first...
Topics Subscribe Reply

Return To Classic site 😭
Or... let us know if a problem, so we can tweak! 😅