Well i done it!

> 10 years ago
Reply
Register to post, see what you've read, and subscribe to topics.
teatrea
teatrea
QLD
4177 posts
QLD, 4177 posts
1 Aug 2010 3:59pm
I went against everybodys good advice and modified my downwinder.Note to self dont attempt things you know nothing about!

Before shot




After





I got the carbon skin off great , shaped the foam how i wanted it , but know one told me resin eats foam.**** now ive done it , my wife yells out what ya doing up their , oh nothin darlin just recking a $2,000 BOARD.iM IN DEEP ****!

Oh well ill try it out tomorrow , who nows it may work.
CMC
CMC
QLD
3954 posts
CMC CMC
QLD, 3954 posts
1 Aug 2010 4:03pm
Crikey.
teatrea
teatrea
QLD
4177 posts
QLD, 4177 posts
1 Aug 2010 4:20pm
CMC said...

Crikey.


My wife said something similar , although their where a few expletives thrown in.
husq2100
husq2100
QLD
2031 posts
QLD, 2031 posts
1 Aug 2010 4:30pm
awesome you gave it a go mate....and youve probably learnt more than u know.....I was aware that different resins are compatible with different foams....just not sure which ones.

youve lost nothing in this exercise but gained a great deal....regardless of the outcome.

i bet youll really enjoy your first paddle on it
DavidJohn
DavidJohn
VIC
17570 posts
VIC, 17570 posts
1 Aug 2010 4:33pm
Looks like it's bleeding..

DJ
teatrea
teatrea
QLD
4177 posts
QLD, 4177 posts
1 Aug 2010 4:38pm
DavidJohn said...

Looks like it's bleeding..

DJ


Nah thats my blood after the missus clipped me round the ears.Husq yeah it started of really well the shape was sweet and then panic set in.Any way i think i will still be able to ride it as the nose area wont be in the water much anyway.I have just reduced the waterline length.
CMC
CMC
QLD
3954 posts
CMC CMC
QLD, 3954 posts
1 Aug 2010 4:38pm
teatrea said...

CMC said...

Crikey.


My wife said something similar , although their where a few expletives thrown in.


I'm sure it's rescuable. The best thing about these things is that if you have shaped it OK you can filler, sand and paint it to match again.

Can't see how the bottom looks now but you might find it better for you. Hope it all works out mate.
62mac
62mac
WA
24860 posts
WA, 24860 posts
1 Aug 2010 2:49pm
Well done,I think the new nose shape looks the goods,just keep on painting the rest red looks nice. If it looks a little rough take to a finisher.

Your alot like me,ask listen and then go WTF I want to have ago
Downwinder
Downwinder
QLD
2095 posts
QLD, 2095 posts
1 Aug 2010 5:06pm
Hope the board goes better for you
GizzieNZ
GizzieNZ
4103 posts
4103 posts
1 Aug 2010 3:46pm
Good on ya!!! Am sure you are now almost an expert on board modifications now.....will be able to advise even us kiwis.....Sounds like high adrenalin heart pounding stuff tho
laceys lane
laceys lane
QLD
19804 posts
QLD, 19804 posts
1 Aug 2010 7:46pm
i like the shape teatrea and think it will be good. as i said to you on the phone earlier, your lucky the whole front of the board didn't melt away
cRAZY Canuk
cRAZY Canuk
NSW
2528 posts
NSW, 2528 posts
1 Aug 2010 7:49pm
teatrea said...

but know one told me resin eats foam.**** now ive done it ,


Did you use polyester resin?
teatrea
teatrea
QLD
4177 posts
QLD, 4177 posts
1 Aug 2010 8:35pm
cRAZY Canuk said...

teatrea said...

but know one told me resin eats foam.**** now ive done it ,


Did you use polyester resin?



I dont know what type it was , off the shelf bunnings.

Any way i think the board will go o.k , in the next couple of days ill do the 8k run up Currumbin Ck and see how the times compare , the best i have done before was 58min.
aus301
aus301
QLD
2039 posts
QLD, 2039 posts
1 Aug 2010 10:00pm
teatrea said...

cRAZY Canuk said...

teatrea said...

but know one told me resin eats foam.**** now ive done it ,


Did you use polyester resin?



I dont know what type it was , off the shelf bunnings.



I made a similar mistake many years ago, polyester resin eats styrofoam. I guess it's a mistake you will only make once in your lifetime.
Simondo
Simondo
VIC
8025 posts
VIC, 8025 posts
1 Aug 2010 10:19pm
I like the new board / new nose !! Moved it away from the kayak front end ! I would guess it will be slightly slower in flatwater, but slightly better in good downwind conditions.... ??

Yes, Polyester Resin eats Expanded Polystyrene (EPS) !! You need Epoxy Resin for EPS. If not available at Bunnings, you would need ask for it at Mitre 10, or your yatching supplies place.
Starlet gc
Starlet gc
NSW
374 posts
NSW, 374 posts
2 Aug 2010 9:25am
DavidJohn said...

Looks like it's bleeding..

DJ


think its needs a band aid.... or man aid??
teatrea
teatrea
QLD
4177 posts
QLD, 4177 posts
2 Aug 2010 7:54pm
went for a test run tonight and i was pleasantly suprised , i think it will definatley be better in downwinders , on the flat i think it feels a bit faster too.Caught some little bumbs in the creek mouth easily.So thankfully i didnt reck it , it looks like crap but i can probably smarten it up a bit.

What type of filler would one use?
chopsyify
chopsyify
QLD
66 posts
QLD, 66 posts
2 Aug 2010 7:59pm
teatrea said...

went for a test run tonight and i was pleasantly suprised , i think it will definatley be better in downwinders , on the flat i think it feels a bit faster too.Caught some little bumbs in the creek mouth easily.So thankfully i didnt reck it , it looks like crap but i can probably smarten it up a bit.

What type of filler would one use?


go see shapers in currumbin they are really helpful and good to deal with
surfydad
surfydad
QLD
166 posts
QLD, 166 posts
2 Aug 2010 8:11pm
A DC17 for $2000? Was it second? Did you discuss with dale???
laceys lane
laceys lane
QLD
19804 posts
QLD, 19804 posts
2 Aug 2010 8:14pm
teatrea said...

went for a test run tonight and i was pleasantly suprised , i think it will definatley be better in downwinders , on the flat i think it feels a bit faster too.Caught some little bumbs in the creek mouth easily.So thankfully i didnt reck it , it looks like crap but i can probably smarten it up a bit.

What type of filler would one use?


the good- i saw teatrea, raced out, took his paddle and had a go. yep, i think it's really good. certainly fast, caught a pimple right into the carpart from the surfline. it behave nicely, as able to go down the elevators with ease and seemed quick to paddle.

the bad- 1 -what a mess. don't even think about doing any more teatrea please. even the experts will be scatching their heads when the see this one. i think you just have to put your hat in your hand and cop it sweet

2- get the steering tighten up and adjusted, i can feel it wondering around on the wave. you can't expect the board to go well when the rudder is flapping around in the water. i can show you how to do it. cables get loose because they stretch. they need to be looked at regularly and adjusted as needed. that goes for all steering systems


pretty pleased for you- well worth keeping, but get the professionals to fix it up
teatrea
teatrea
QLD
4177 posts
QLD, 4177 posts
2 Aug 2010 8:21pm
yeah good advice Lacey , i think ill just leave it though i dont want to spend any more money on it , ill just ride it to death and then get Dale to shape me a new one.Ill take you up on the offer to show me how to tighten the rudder.

Cheers
Please Register, or first...
Topics Subscribe Reply

Return To Classic site 😭
Or... let us know if a problem, so we can tweak! 😅