Any recommendations for a cover to suit a board 9'2 x 29.5", probably 5mm I would think, and hoping to steer away from the Tarp type material on the outside, if possible. Needs to be a good fit, ie no 10 foot covers. Had the really wide ProLimit cover previously, it was probably OK value for what it was, may end up getting the same (narrower version though) again.
From what I have seen on the net, the OAM in the 9'6 seems to be the standout, but also one of the more expensive covers. The 9 foot Balin could be an option also, not sure but I think I read somewhere that they are really generous with their sizing, so a 9'2 should fit.
Has anybody seen the JP covers? They are listed on the JP web site but can't see them at any retailers on line.

Thanks,
Scott.

Hi Scott,

Flying Objects makes a 9'6 x 30 Travel cover that uses 600D for both the top and bottom and uses 6mm foam. Below is our spec sheet for these covers and they are available from most SUP retailers.

www.flyingobjects.com.au/contact-us/oceania/australia/

RRP = $199.00




Cheers,
Marco
Flying Objects is a site Sponsor

This is all I need for my Starboard Astro Touring> Holds all of my gear including board paddle pump and westsuits

seasdes said..

This is all I need for my Starboard Astro Touring> Holds all of my gear including board paddle pump and westsuits

Now that's what I call a board bag..

DJ

Am definitely considering the Balin, but going to check out the OAM a bit closer on the weekend.

Cheers,
Scott.