Paddling the Glide vid.

> 10 years ago
Reply
Register to post, see what you've read, and subscribe to topics.
DavidJohn
DavidJohn
VIC
17570 posts
VIC, 17570 posts
17 Dec 2008 12:32pm
Yesterday I did a short vid paddling the new Naish Glide.. It was back to cold and crappy Melbourne weather but I still managed to find some glass.

Sorry about the shaky camera it was being held in my mouth which made breathing dificult..and I couldn't work out how to delete the original sound.

This was my first attempt at using Windows movie maker..Anyone else know how to delete the original sound?

Notice how towards the end you see my paddle entering the water it's not that close to my board because of the no-nose so that should reduce board bashing.

Also notice how there is very little wake behind the board.. Usually when I look back is glassy conditions I see a long V wake off the tail of the board.

I'm sure less wake means less drag.. The board speeds up quick and slowly glides to a stop once you stop paddling.. Maybe that's why they call it the Glide.

DJ

JonathanC
JonathanC
VIC
1024 posts
VIC, 1024 posts
17 Dec 2008 2:16pm
Hey DJ there was a close up of something weird and disturbingly fleshy at one point - I think it was just after you breathed something about the "long V wake off my tail". The sooner you start borrowing my head cam the better for all concerned.
DavidJohn
DavidJohn
VIC
17570 posts
VIC, 17570 posts
17 Dec 2008 2:30pm
JonathanC said...

Hey DJ there was a close up of something weird and disturbingly fleshy at one point - I think it was just after you breathed something about the "long V wake off my tail". The sooner you start borrowing my head cam the better for all concerned.


..maybe I forgot to zip up.. ...btw Did you get some good footage of the B to B race on the weekend>

You need to join us on our next big down winder with that helmet cam..

DJ

aussiewahine
aussiewahine
QLD
798 posts
QLD, 798 posts
17 Dec 2008 1:57pm
DavidJohn said...
This was my first attempt at using Windows movie maker..Anyone else know how to delete the original sound?



DJ..At the bottom of the page just above the "Storyboard" on the far left side, you will see an "Audio Level" icon. Click on that. There you can adjust the levels with the slider to select how much (if any) natural/original sound you want to leave on your clip and how much music you want over the top of it.

Hope this helps Darth
DavidJohn
DavidJohn
VIC
17570 posts
VIC, 17570 posts
17 Dec 2008 3:00pm
Thanks Sue.. .. btw.. I fiddled with that thingie but I could only adjust the music volume not the original sound?

DJ
aussiewahine
aussiewahine
QLD
798 posts
QLD, 798 posts
17 Dec 2008 2:10pm
DavidJohn said...

Thanks Sue.. .. btw.. I fiddled with that thingie but I could only adjust the music volume not the original sound?

DJ


Which thingie were you fiddling with ??

If you slide the slider all the way over to the "music side" on the right it should completely eliminate the original sound.
DavidJohn
DavidJohn
VIC
17570 posts
VIC, 17570 posts
17 Dec 2008 3:27pm
Thanks Sue.. I think I know what you mean now. I'll just keep fiddling with the thingie..

DJ
Scotty Mac
Scotty Mac
SA
2060 posts
SA, 2060 posts
17 Dec 2008 10:01pm
David,
The board looks nice and matches well with your white crocs...
Is the balance point on the handle ok in the end>? Are you going to install indy plugs?
oliver
oliver
3952 posts
3952 posts
17 Dec 2008 8:40pm
The mouth cam was kind of novel when I first saw it, but I'm not so sure about it now - I felt a bit embarrassing watching it at work with the sound turned up. After I finished I looked around and some of my work colleagues had these weird blank expressions on their faces.
champcrow
champcrow
SA
804 posts
SA, 804 posts
17 Dec 2008 11:04pm
You sure it wasn't your haircut they were stairing at Oli

Nice one though DJ but i'm with Oli the breathing had my missus stick her head in the door to see what i was whatching
Please Register, or first...
Topics Subscribe Reply

Return To Classic site 😭
Or... let us know if a problem, so we can tweak! 😅