Quad Fins recommendations

> 10 years ago
Reply
Register to post, see what you've read, and subscribe to topics.
lowers
lowers
VIC
19 posts
VIC, 19 posts
26 Mar 2012 2:33pm
Hi, I need a new set of quad fins...I have had the imon Anderson quads and was happy with them, but just wondering if anyone has any recommendations which might be better...To fit PSH 9 11 Ripper...Thanks in advance.
Zeusman
Zeusman
QLD
1363 posts
QLD, 1363 posts
26 Mar 2012 5:18pm
I use the Gerry Lopez Quad set in my 9'5" Widepoint. They're good.
wazza66
wazza66
QLD
622 posts
QLD, 622 posts
26 Mar 2012 8:09pm
I use the Pancho Thruster fins in the front and the controller rears in the back.

Good drivey feel but you can still pivot easily.

Or you can buy the PSH quad set which is the same fins with a PSH logo on them.

AA from paddlesurf australia sells them
BillyT
BillyT
WA
17 posts
WA, 17 posts
27 Mar 2012 12:12am
I use Rainbow Fins Speedwings in the front and the Controller rears in the back. Like the speedwings alot - using them on my SB and SUPs
supa
supa
NSW
249 posts
NSW, 249 posts
27 Mar 2012 8:50am
Depends on your style of surfing, if you like to tail slide go smaller maybe shapers quadie and if you like to carve with better drive go bigger maybe Jerry Lopez quad
LouD
LouD
WA
642 posts
WA, 642 posts
27 Mar 2012 7:28am
Zeusman said...

I use the Gerry Lopez Quad set in my 9'5" Widepoint. They're good.


Do they make the GL quads in FCS?
Anyone want to swap for a set of futures?.
standupper
standupper
387 posts
387 posts
27 Mar 2012 4:37pm
GizzieNZ said...

Just snapped two of my quad fins on my PSH ripper when destroyed by an over vigorous shore break.
Thinking of the shapers Quad E as replacement set.
Why? Well the word cheapest does come into the equation

http://www.supgearaustralia.com/shop/index.php?product=QUAD-E


I thought you were sponsored by Pipefins gizzie!
hilly
hilly
WA
8120 posts
Piros
Piros
QLD
7296 posts
QLD, 7296 posts
27 Mar 2012 7:24pm
wazza66 said...

I use the Pancho Thruster fins in the front and the controller rears in the back.

Good drivey feel but you can still pivot easily.

Or you can buy the PSH quad set which is the same fins with a PSH logo on them.

AA from paddlesurf australia sells them


+1 on that

Simon Andersons SA4's next choice , the Gerry Quads are too big.
Josh808
Josh808
NSW
35 posts
NSW, 35 posts
27 Mar 2012 9:07pm
These are the newer Shapers Quad E sets
www.wetfins.com.au/categories/surfboard-fins/quad-fins/fcs-quad-fins.html

GizzieNZ said...

Just snapped two of my quad fins on my PSH ripper when destroyed by an over vigorous shore break.
Thinking of the shapers Quad E as replacement set.
Why? Well the word cheapest does come into the equation

www.supgearaustralia.com/shop/index.php?product=QUAD-E


GizzieNZ
GizzieNZ
4103 posts
4103 posts
27 Mar 2012 6:47pm
standupper said...

GizzieNZ said...

Just snapped two of my quad fins on my PSH ripper when destroyed by an over vigorous shore break.
Thinking of the shapers Quad E as replacement set.
Why? Well the word cheapest does come into the equation

http://www.supgearaustralia.com/shop/index.php?product=QUAD-E


I thought you were sponsored by Pipefins gizzie!

Nah....though have noticed he does quad fins now .....but don't think I will go there (and he is probably not keen on seeing his fins on "enemy" boards) ie sups

www.facebook.com/pages/Pipe-Fins/120412934696600?sk=info#!/photo.php?fbid=289613174443241&set=pu.120412934696600&type=1&theater


GizzieNZ
GizzieNZ
4103 posts
4103 posts
27 Mar 2012 6:56pm
Josh808 said...

These are the newer Shapers Quad E sets
www.wetfins.com.au/categories/surfboard-fins/quad-fins/fcs-quad-fins.html

GizzieNZ said...

Just snapped two of my quad fins on my PSH ripper when destroyed by an over vigorous shore break.
Thinking of the shapers Quad E as replacement set.
Why? Well the word cheapest does come into the equation

www.supgearaustralia.com/shop/index.php?product=QUAD-E



Sound like better build quality & still a good price I see

GizzieNZ
GizzieNZ
4103 posts
4103 posts
27 Mar 2012 7:04pm
Some useful info on this breeze link also....especially regarding PSH boards
www.seabreeze.com.au/forums/Stand-Up-Paddle/Review/2011-PSH-fins/
lowers
lowers
VIC
19 posts
VIC, 19 posts
27 Mar 2012 11:10pm
I have tried to get 1 fin to replace the one that dropped out....can't do it via surf stitch...does anyone know if replacements can be purchased or do you have to purchase sets?
KP.
KP.
NSW
116 posts
KP. KP.
NSW, 116 posts
8 Apr 2012 7:30am
Try to remember in fins that a more upright fins as in straight up and down is going to give you more pivot and a fin that is horizontal as in left to right will give you more carving. Plus hit up your buddies and mates to see if they have got and spare fins to lend you. Even if it is only the rears or the front ones. It is at least a start and just make a note of what you used, a rating out of 10 and the conditions you used them in. IF you do that you will get the pair you want in no time.
nash
nash
NSW
12 posts
NSW, 12 posts
11 Apr 2012 11:34pm
lowers said...

I have tried to get 1 fin to replace the one that dropped out....can't do it via surf stitch...does anyone know if replacements can be purchased or do you have to purchase sets?


Most shops will only sell fins in sets!
I have found the H2 fins work really well in all my boards (9'6' Mctavish SUP, Shortboard and Longboards) they really liven up the SUP for surfing!
Stay In Trim
Nash
toddws
toddws
WA
469 posts
WA, 469 posts
19 Apr 2012 10:21pm
nash said...

lowers said...

I have tried to get 1 fin to replace the one that dropped out....can't do it via surf stitch...does anyone know if replacements can be purchased or do you have to purchase sets?


Most shops will only sell fins in sets!
I have found the H2 fins work really well in all my boards (9'6' Mctavish SUP, Shortboard and Longboards) they really liven up the SUP for surfing!
Stay In Trim
Nash

Depends on manufacturer, we sell futures and they will pretty much ship individual fins for any set. Get your fin supplier to phone Antman at futures and check, but we regulary supply individual fins due to damage or loss
AkeG
AkeG
133 posts
133 posts
20 Apr 2012 6:19am
I second the GL Quads if you are over 200 lbs. I have them in my 8'10' Widepoint. Now that I have finally figured out how to surf with them they give me a nice combination of grip and drive on a fat short & wide board. Yes, FCS does make them.

Zeusman said...

I use the Gerry Lopez Quad set in my 9'5" Widepoint. They're good.


sepirott
sepirott
NSW
336 posts
NSW, 336 posts
20 Apr 2012 6:16pm
Lowers, I love using size 5's allround when I had my 10ft McT quad and they went awesome. I used Kelly's originally until I sold the board but have bought heaps of fins from www.wetfins.com.au/ and they rock!! I went with shapers and scarfini from them and both good value for money, and I now have them on all my boards. I really think you need at least 5's if you are over 100kg IMO, as when I have had three's they spin out a bit, I am a heavy backfoot surfer though (longboarder lol). A lot of guys mix and match sizes front and back. experiment with a few fins of your other boards if you can. Good Luck!
AKSonline
AKSonline
WA
925 posts
WA, 925 posts
21 Apr 2012 12:39pm
lowers said...

I have tried to get 1 fin to replace the one that dropped out....can't do it via surf stitch...does anyone know if replacements can be purchased or do you have to purchase sets?


Hey Lowers,

Todds is right, Futures sell individual fins, if your local store won't an individual fin, then find a better store. They are available in singles from both FCS and Futures.

It's more profitable and easier for stores to only stock and sell sets. As a surfer and being forced to buy sets in the past when I have broken one only, I decided we would always supply single fins to customers. I have a few back fins in FCS coz they never break, it's always a side.

If you buy a top set of fins for 150-180, you don't want to have to purchase the lot again on the account of one fin. They aren't 1/3rd of the price, but still way cheaper than a full set.

Can't speak highly enough of the Futures service, usually a next day delivery if we order before lunch. From Goldie to Perth in 24hrs? Outstanding!

DM
AA
AA
NSW
2167 posts
AA AA
NSW, 2167 posts
21 Apr 2012 4:20pm
It does depend on the fin set. I know Futures do not carry spares for every single fin set ie: PSH Futures Quads. So check with your dealer.
colas
colas
5379 posts
5379 posts
21 Apr 2012 4:56pm
I have discovered the scarfini fins, very fun and fast fins. I Use the HX3 for my 95kg in quads http://www.scarfinifins.co.za/index.php?page=allfins.php&category=1 that give me the most speed for conditions I feel confortable with where I want the more speed and power out of my fins. I feel they make the board more lively than the other FCS fins I have.

For gnarly conditions where I want maximum control, drive and grip, I am addicted to C-Drives however (but they are not available for Futures bixes)
rodriguez
rodriguez
VIC
883 posts
VIC, 883 posts
22 Apr 2012 12:52pm
I agree,i had the psh quads on my 9-2 psh,and found them too stiff. Put them on my 9-11 psh and it projects like stink now. I have put SA quads on the 9-2 and its much better,but i still like the thruster set up over the quads.Its really a matter of personal preference isnt it?

[qte]Piros said...

wazza66 said...

I use the Pancho Thruster fins in the front and the controller rears in the back.

Good drivey feel but you can still pivot easily.

Or you can buy the PSH quad set which is the same fins with a PSH logo on them.

AA from paddlesurf australia sells them


+1 on that

Simon Andersons SA4's next choice , the Gerry Quads are too big.


fastfredo
fastfredo
52 posts
52 posts
23 Apr 2012 8:43am
FCS PC-7 quad set are exceptional. The Lopez equivalent are just too big and stiff.
hilly
hilly
WA
8120 posts
WA, 8120 posts
23 Apr 2012 8:55am
fastfredo said...

FCS PC-7 quad set are exceptional. The Lopez equivalent are just too big and stiff.


Not if you are 105kg love GL's in my 9 2 and PSH's in my 10er
AA
AA
NSW
2167 posts
AA AA
NSW, 2167 posts
23 Apr 2012 12:38pm
Just got news that the PSH Futures quads will be back in stock early May



PM me if you need a set. They are all clear/white ( as per rear set in photo)


GizzieNZ
GizzieNZ
4103 posts
4103 posts
27 Apr 2012 12:31pm
My PSH 9'6 ripper is going great with the MRTX on the front and fcs H2 large on the rear. Feels really well balanced compared to my previous set up which was mickey mouse plastics on the front and shapers SV2 on the rear.
Has now got heaps more fin area & feels much more dependable in frisky wave situations :)

GizzieNZ
GizzieNZ
4103 posts
4103 posts
27 Apr 2012 12:42pm
They look enormous in that pic....this one probably gives a better perspective



Anyone tried the Indo fins? They look a good way to try out different concepts without spending mega bucks
riverider
riverider
TAS
1112 posts
TAS, 1112 posts
27 Apr 2012 7:32pm


Anyone tried the Indo fins? They look a good way to try out different concepts without spending mega bucks

I've had a few sets of the Indo fins and recon they are good value.

GizzieNZ
GizzieNZ
4103 posts
4103 posts
6 Jun 2012 3:24pm
GizzieNZ said...

They look enormous in that pic....this one probably gives a better perspective



Anyone tried the Indo fins? They look a good way to try out different concepts without spending mega bucks

i think those mr are pretty ginormous actually. I found them almost boringly stable (but that can be advantageous in big surf)

GizzieNZ
GizzieNZ
4103 posts
4103 posts
6 Jun 2012 3:27pm
Are quad fins more likley to snap off than thruster set ups?
Please Register, or first...
Topics Subscribe Reply

Return To Classic site 😭
Or... let us know if a problem, so we can tweak! 😅