Just recently purchased a new what I thought was a 10'6 extra wide ripper but after my first paddle at suffers paradise on weekend found it to be a lot less stable than the board I test rode a month ago. On a closer inspection tonight I realized it is a 10'6 extra wide gun . Can any one explain the dimensions of the two . Website says they are the same . Does not make sense to me.
10-6 Gun Ripper.
10' 6" x 28 1/2" x 4 5/16" Volume=140L
10-6 Ripper X-Wide
10'6" x 32" x 4 5/8" Volume=161L
10-11 Gun Ripper X-Wide
10'11” x 32” x 4 5/8”
frosty, my understanding is they do a 10'6 x - wide ripper gun board as well. It is 32 wide same as the standard x - wide ripper but has a narrow entry on the shoulder and narrower tail. when i bought my 10'6 x - wide ripper i had it alongside the gun in the shop and the shape is quite diferent.
There are only two Wood Veneer models in 10'6 as SW'ly has listed.
10-6 Gun Ripper.
10' 6" x 28 1/2" x 4 5/16" Volume=140L
10-6 Ripper X-Wide
10'6" x 32" x 4 5/8" Volume=161L
Frosty maybe you tried the old 10'11 XWRipper?
10-11 X-Wide - 10'11" x 32" x 4 5/8"
The 10'6 Gun is a rare board. We had one in store- which Farquo mentioned but it is 28 1'2 wide (Towny snapped it up) and a very different board to the 10'6 XWR
I ordered a extra wide ripper and the bottom of my board says 10'6 extra wide gun ripper .is it the same board . According to farquo it is a little bit narrower in the tail which would make it a little less stable an less volume. Is this correct
There are only two Wood Veneer models in 10'6 as SW'ly has listed.
10-6 Gun Ripper.
10' 6" x 28 1/2" x 4 5/16" Volume=140L
10-6 Ripper X-Wide
10'6" x 32" x 4 5/8" Volume=161L
Frosty maybe you tried the old 10'11 XWRipper?
10-11 X-Wide - 10'11" x 32" x 4 5/8"
The 10'6 Gun is a rare board. We had one in store- which Farquo mentioned but it is 28 1'2 wide (Towny snapped it up) and a very different board to the 10'6 XWR
