Hi all,
I have a masthead VHF aerial and cable that I'm keen to get installed on my 24fter.
I'd prefer to have someone do it professionally. Does anyone know what kind of a contractor would do that?Originally I was thinking someone in marine electronics, but realised that most of them probably specialise in powerboat stuff rather than climbing masts. Then I was thinking a rigger.
Anyone with advice on this one?
Much appreciated
Edit: location is Perth
Select to expand quotePoodle said..
Try Pete at... www.maritimeelectronics.com.au/
In my experience, if Pete can't do it then you're outa luck.
24ft yacht has a small mast. I would drop it myself and pull the cables through. A rigger would probably want it down anyway.
To get a small yacht mast down, find a friend with a bigger boat. Raft up, masts abeam. connect your kite halyard to theirs on a calm morning and winch it a little up and down.
Then you can work on the mast to your hearts content. Insert a conduit to run the vhf aerial through and check the sheaves.
cheers
Phil
Select to expand quoteKankama said..
24ft yacht has a small mast. I would drop it myself and pull the cables through. A rigger would probably want it down anyway.
To get a small yacht mast down, find a friend with a bigger boat. Raft up, masts abeam. connect your kite halyard to theirs on a calm morning and winch it a little up and down.
Then you can work on the mast to your hearts content. Insert a conduit to run the vhf aerial through and check the sheaves.
cheers
Phil
I agree. I pulled the mast down on a 26 footer by myself using this method in the photo.
