Still thinking about options Ive a couple of weeks before I start on this project.
return the head to its original place and fit fridge and sinks to the port side next to the gimbaled stove. and then remove the old fridge from the starboard side and make full width draws starting with a chart draw and continue down
Photo above The bench top would continue just under that small shelf above in line with the stove top with sinks and fridge
Photo below
Full width draws starting with a chart draw for the top one. No fridge lid and new bench top matching the port side all draws being as deep as possible and the head return to its original place in the forward cabin
2 weeks to think about my two options the other option is the head fitted in a compartment next to the stove gimbal
Similar to this only on the port side
Then the sink and Day fridge would be in the old fridge cabinet( photo above) and a larger fridge freezer where the head was in the forward cabin