My next purchase is?

9 years ago
Reply
Register to post, see what you've read, and subscribe to topics.
southace
southace
SA
4796 posts
SA, 4796 posts
3 Jun 2016 7:53am
I just drill some big holes and stick it in right?

http://www.ebay.com.au/itm/Bow-Thruster-Full-Kit-12-Volt-Boats-8-5-to-12-5-metres-BOW5512-Vetus-55-kgf-/272213403614?hash=item3f612ee7de:g:b1cAAOSwlV9WS9S3
Bruski068
Bruski068
VIC
457 posts
VIC, 457 posts
3 Jun 2016 10:45am
I'm starting to wonder when you'll put a Spa bath on board.
southace
southace
SA
4796 posts
SA, 4796 posts
3 Jun 2016 10:27am
It's not about impressing the chicks I already do that with my boating skills. It's more the fact I single hand solo most of the time and my 12ton tub doesn't like going backwards and I feel I will come unstuck someday when entering or departing foreign ports.
Windjana
Windjana
WA
405 posts
WA, 405 posts
3 Jun 2016 9:37am
southace said..
It's not about impressing the chicks I already do that with my boating skills. It's more the fact I single hand solo most of the time and my 12ton tub doesn't like going backwards and I feel I will come unstuck someday when entering or departing foreign ports.


If it's big enough Southace, you should try using both hands......
Yara
Yara
NSW
1317 posts
NSW, 1317 posts
3 Jun 2016 3:02pm
PBO Practical Boat Owner had a good article on thruster installation. The fibre glass work it tricky, as is the mechanical support of the drive.
Why not try an electric outboard on the taffrail or a bracket off the stern that can counteract your prop walk?
Crusoe
Crusoe
QLD
1197 posts
QLD, 1197 posts
3 Jun 2016 4:03pm
Could be too small. I looked into putting one of the Vetus units in my 40 footer and the tunnel I installed was a 185mm. Didn't end up installing the rest as I just got better at handling (and planning) my departures and entries in to marinas. It would still be nice to have for those for pear shaped moments. Sometimes minties just don't cut it.

This was the unit I was looking at. Lot cheaper now by the look of things. (tempted)

http://www.ebay.com.au/itm/Bow-Thruster-95-kgf-12-Volt-Boats-12-to-17-metres-BOW9512-Vetus-/272243353749





Windjana
Windjana
WA
405 posts
WA, 405 posts
3 Jun 2016 2:21pm
Something like this Southace?












samsturdy
samsturdy
NSW
1659 posts
NSW, 1659 posts
3 Jun 2016 4:29pm

Don't they have water jet thrusters now. Just blows high pressure water through something
the size of a skin fitting??.
Lazzz
Lazzz
NSW
912 posts
NSW, 912 posts
3 Jun 2016 4:43pm
Yara said..

Why not try an electric outboard on the taffrail or a bracket off the stern that can counteract your prop walk?


That's on my list SA but will have to wait a while.

That's exactly how mine will be NowandZen - I'm just worried about getting the holes right!!

For now I have an electric outboard which I extended the leg for those "pear shaped moments" - haven't had to use it yet!!





Windjana
Windjana
WA
405 posts
WA, 405 posts
3 Jun 2016 2:46pm
I don't use mine that much - kind of cheating really!
But when I do, I usually put full rudder on in reverse with the bow thruster assisting and it usually results in a sharp turn with the girls on the wharf throwing their knickers at me.
Southace, you must get one.
southace
southace
SA
4796 posts
SA, 4796 posts
3 Jun 2016 4:25pm
Stop showing of now n zen, I seen the sweat on your brow entering foreign ports! If I was on the helm with a bow thruster I would have been whistling when the saints come sailing home while sipping a strong scotch!

A water jet system would be possibly suitable for my application 1 1/2 fittings perhaps? Might have to give that a google tonight!
Windjana
Windjana
WA
405 posts
WA, 405 posts
3 Jun 2016 3:02pm
Every port for us is a new one SA, anyhow that was aaages ago!!!
FreeRadical
FreeRadical
WA
855 posts
WA, 855 posts
3 Jun 2016 3:08pm
Not the best looking device, but installation looks pretty straight forward

www.yachtthruster.com/overview/




Jet thruster


www.jetthrusters.com








southace
southace
SA
4796 posts
SA, 4796 posts
3 Jun 2016 4:40pm
I need some weight in the bow she's stern heavy when the 1000 litre water tanks are full, can't see any prices for the Jet thrusters but would be ideal for me. Might even incoprate my holding tank to the jets!
southace
southace
SA
4796 posts
SA, 4796 posts
3 Jun 2016 5:28pm
That yacht thruster looks scary but easy to fit! I don't think I would go for one of them unfortantly. I might just stay away from marinas and invest in more solar and wind.
RiffRaff
RiffRaff
WA
265 posts
WA, 265 posts
3 Jun 2016 5:47pm
This is how it's done southace
southace
southace
SA
4796 posts
SA, 4796 posts
3 Jun 2016 7:41pm
After watching this instulation video on jet thruster I think I will just make do with what I have!

Crusoe
Crusoe
QLD
1197 posts
QLD, 1197 posts
3 Jun 2016 8:23pm
Lazzarae said..

Yara said..

Why not try an electric outboard on the taffrail or a bracket off the stern that can counteract your prop walk?



That's on my list SA but will have to wait a while.

That's exactly how mine will be NowandZen - I'm just worried about getting the holes right!!

For now I have an electric outboard which I extended the leg for those "pear shaped moments" - haven't had to use it yet!!






Have a look at the Vetus instructions for marking the hole. It's actually quite simple.



www.vetus.com/media/magentominds/sasdocument/20130916114555_0.pdf
southace
southace
SA
4796 posts
SA, 4796 posts
3 Jun 2016 8:23pm
No I have changed my mind, I'm going to move my liferaft forward and replace the little solar panel with a 200w panel and live of the grid starting September at this secret island Before heading town to Tassie for Christmas.

http://www.ebay.com.au/itm/ANTENERGY-SOLAR-Mono-4BB-12V-220W-Solar-Panel-Caravan-Boat-Camping-Charging-200W-/351666528546
Bruski068
Bruski068
VIC
457 posts
VIC, 457 posts
4 Jun 2016 9:18am
That would have always been my first choice
Wander66
Wander66
QLD
294 posts
QLD, 294 posts
4 Jun 2016 10:32am

That Captain Ron is a legend and that movie is one of the funniest sailing movies yet, right up there with Alby Mangels and the World Safari series!

A very apt acronym that is regularly used on this forum is B.O.A.T but in this case and many other subjects I see on this forum another one springs to mind and that is K.I.S.S (Keep It Simple Stupid). I have worked with many civil engineers over the last 20 years that have tried to "invent a better mouse trap" and not one of them has succeeded, all they do is leave a legacy of cost that we as consumers and tax payers end up paying for.

Good thinking re increasing solar power and living away from the grid, I haven't spent that much time in marinas but to me it's like living on the streets in the city, the lights are always on outside and it's noisy, maybe even worse because you have to pay for the privilege.
Libran
Libran
92 posts
92 posts
4 Jun 2016 10:19am
southace said..
I just drill some big holes and stick it in right?

http://www.ebay.com.au/itm/Bow-Thruster-Full-Kit-12-Volt-Boats-8-5-to-12-5-metres-BOW5512-Vetus-55-kgf-/272213403614?hash=item3f612ee7de:g:b1cAAOSwlV9WS9S3


I had to move my batteries to a spot next to the thruster because of the voltage loss. I can not get a reading on the current draw because my clamp on amp meter trips out at 400 amps. Voltage loss at the batteries when under load was down to 9.5 volts from 13.2volt LiFePo4 batteries. Would be worse with lead acid.

Reduces stress substantially when manouevering in close quarters.
ChopesBro
ChopesBro
351 posts
351 posts
4 Jun 2016 12:14pm
I have a huge issue with cutting any holes in a seaworthy hull.

As far as docking goes....sometimes I'm great...often average ..and sometimes pretty poor.

I think its 99% in my mind...I know I can do it...I know I can and have done it well. ...I just can't seem to do it well consistently.

Besides....boats and wharfs are built to bump into each other...aren't they
Please Register, or first...
Topics Subscribe Reply

Return To Classic site 😭
Or... let us know if a problem, so we can tweak! 😅