a creature is stirring in SA

> 10 years ago
Reply
Register to post, see what you've read, and subscribe to topics.
landyacht
landyacht
WA
5921 posts
WA, 5921 posts
20 Mar 2012 8:10pm
Ive been getting some photos from a mate in Adelaide to wet the whistle over the last week or 2,
today the vic effect started agin when these photos turned up

aparently they will be used to lift the back up on this



aus230
aus230
WA
1660 posts
WA, 1660 posts
20 Mar 2012 8:48pm
very nice
Chook2
Chook2
WA
1249 posts
WA, 1249 posts
20 Mar 2012 9:04pm
NYCE!!!!
An interesting way to keep the front wheel more upright when turning.
And suspension........... Drool.
hills
hills
SA
1622 posts
SA, 1622 posts
20 Mar 2012 11:56pm
WOW!!
desertyank
desertyank
1264 posts
1264 posts
20 Mar 2012 11:17pm
landyacht said...

Ive been getting some photos from a mate in Adelaide to wet the whistle over the last week or 2,


Time to show your mate how to sign up for seabreeze.....

Love the new rig!
gibberjoe
gibberjoe
SA
956 posts
SA, 956 posts
21 Mar 2012 9:18am

SO...it jist goe's to show....WE South Australians could well be a cut above the

rest [}:)] or have more kangaroos per cranium.........nice work ! BRO....
nebbian
nebbian
WA
6277 posts
WA, 6277 posts
21 Mar 2012 9:13am
That king pin inclination makes my head hurt trying to figure out what the geometry will be like when it turns...

Beautiful bit of work!
IPKSA
IPKSA
177 posts
177 posts
22 Mar 2012 8:54am
Super looking build
kiwi307
kiwi307
488 posts
488 posts
23 Mar 2012 2:56pm
Looks amazingly like a Finch shed with a combination of a lot of previous observations!
Clemco
Clemco
430 posts
430 posts
23 Mar 2012 3:06pm
nebbian said...

That king pin inclination makes my head hurt trying to figure out what the geometry will be like when it turns...

Beautiful bit of work!






Yes It was, And the French are still using it 30yrs later!!!
VindisDad
VindisDad
117 posts
117 posts
23 Mar 2012 9:40pm


Hi Guys,

Yes I've finally crawled out from under a rock & am going to have another play.
Hi Rhys, well spotted!
Hi Clemco, nice to get a look at what I'm trying to copy!

Hi to everyone else!

I've kept a low profile because I wanted to finish last car (I'll try to load photo)
It's been a while since I built the last 'yacht, but easier to do these days.





aus230
aus230
WA
1660 posts
WA, 1660 posts
23 Mar 2012 9:45pm
Great to see you back Bill.
Cheers
Vic
aus230
aus230
WA
1660 posts
WA, 1660 posts
25 Mar 2012 8:53am
Hi Bill
Any info on your wheel construction, type of resin and stuff. I really like your new yacht
hope we get to see a couple more coming out of south aus.
That is a great looking car
Cheers
Vic
hills
hills
SA
1622 posts
SA, 1622 posts
25 Mar 2012 11:58am
Welcome back Bill, I'll have to get my PM out of moth balls too now!! I don't think I've sailed it since last time I dropped past your place to see the LLM, due to all the... well you know why.
Nikrum
Nikrum
TAS
1972 posts
TAS, 1972 posts
25 Mar 2012 3:17pm
Right! I certainly hope that pic' is of your new Land Yacht Bill?? The Mast should go about 300-400mm in front of the Rear View Mirror.. If not then I don't want to see it again as I have just turned a Bilious Shade of Green.. Sod!
Anyway as the others said welcome back.
Ron
hills
hills
SA
1622 posts
SA, 1622 posts
25 Mar 2012 7:05pm
Hmmm, replace the front wheels with a single front wheel in front and I think you may be onto something there Ron!!

Anyway Vindi and mini-vindi look almost as good.
colk2004
colk2004
317 posts
317 posts
25 Mar 2012 7:49pm
Nikrum said...

Right! I certainly hope that pic' is of your new Land Yacht Bill?? The Mast should go about 300-400mm in front of the Rear View Mirror.. If not then I don't want to see it again as I have just turned a Bilious Shade of Green.. Sod!
Anyway as the others said welcome back.
Ron


You mean you haven't got one of those in the shed I thought it was a land yachting thing to have a '7' lurking. One day I might even finish mine...after the Scimitar

Cheers Col
Please Register, or first...
Topics Subscribe Reply

Return To Classic site 😭
Or... let us know if a problem, so we can tweak! 😅