Waxing bridles, leaders, and/or flying lines

> 10 years ago
Reply
Register to post, see what you've read, and subscribe to topics.
djdojo
djdojo
VIC
1614 posts
VIC, 1614 posts
10 Feb 2009 2:31pm
Curious what people think about waxing lines to reduce wear and tangles. Does it help, or is it another urban myth? What sorts of wax and what application techniques work best?
puppetonastring
puppetonastring
WA
3619 posts
WA, 3619 posts
10 Feb 2009 12:51pm
Dont know how many sorts & techniques there are but my chicken loop rope is getting a bit furry so it wont be long before it could benefit from a full brazillian waxing.
Fooosh
Fooosh
WA
563 posts
WA, 563 posts
10 Feb 2009 2:23pm
puppetonastring said...

Dont know how many sorts & techniques there are but my chicken loop rope is getting a bit furry so it wont be long before it could benefit from a full brazillian waxing.



Wow!! Is that what you're calling it these days Puppet? Does it grow longer when you tell lies to girls?

Me, I'm just happy with my donkey dick
djdojo
djdojo
VIC
1614 posts
VIC, 1614 posts
10 Feb 2009 6:37pm
hum, i suppose an even slightly serious response would be too much to hope for as soon as the word "wax" is mentioned.
Kalavas
Kalavas
WA
146 posts
WA, 146 posts
10 Feb 2009 10:46pm
djdojo said...

Curious what people think about waxing lines to reduce wear and tangles. Does it help, or is it another urban myth? What sorts of wax and what application techniques work best?


en.wikipedia.org/wiki/UHMWPE

Stuff is pretty slippery anyway...
Lazarus
Lazarus
160 posts
160 posts
11 Feb 2009 12:55am
Dj, stay away from sex wax for the lines - seriously - it causes sand to stick and the grit causes wear and tear. It is said that candle wax is the way to go.
TOAD
TOAD
NSW
305 posts
NSW, 305 posts
11 Feb 2009 7:54am
Beez wax is best
robbo1111
robbo1111
NSW
655 posts
NSW, 655 posts
11 Feb 2009 8:34am
Waxing your chicken loop rope will extend it's life greatly....here's how I do it:
melt a regular candle over a double boiler (a bowl with the candle sitting on top of a saucepan with boiling water), once melted put the chicken loop into the melted wax and use a wooden spoon to work the wax into the rope, season with salt and pepper and reattach to your bar.

As far as bridles and pulleys get yourself some sailkote (available from most ship chandlery's) and spray pulleys and bridles. Sailkote works wonders on pulleys, keeps sand out extends their life too.
Kitejunkiee
Kitejunkiee
SA
117 posts
SA, 117 posts
14 Feb 2009 12:17pm
just rub surf wax onto the chicken loop on a hot day, will melt right in.
surfsky
surfsky
NSW
68 posts
NSW, 68 posts
14 Feb 2009 6:22pm
i agree ....surf wax works fine ...rub it on ..leave it in the sun....problem solved
lotofwind
lotofwind
NSW
6451 posts
NSW, 6451 posts
14 Feb 2009 6:33pm
heard there are places in Sydney you can get a back,sack,crack and chicken loop wax for $30 !!!!!!!!! bargin
Robbo2099
Robbo2099
WA
753 posts
WA, 753 posts
14 Feb 2009 5:56pm
Go to the hardware store and get a stick of "Goss DryLube". Feels like a cross between wax and beeswax. Rub it on the lines. Not sure how long it will last, but it seems to be preventing the chicken line from going fuzzy, which is usually the prelude of it starting to fray.

Other thing is to make sure you rinse all the sand out of the line before kiting. That'll make more difference than anything.
lostinlondon
lostinlondon
VIC
1159 posts
VIC, 1159 posts
14 Feb 2009 8:48pm
I just got an old tin and melted the wax directly on the stove, then put the rope in and let it sit for a few minutes, the wax stays molten for ages. Then as you pull the rope out of the tin get paper towel, wrap it around the rope and run it hard through your hands to force it into the fibres.

If you don't mind spending more cash I would suggest using snowboard wax, its actually designed to repel moisture, especially if it is fluorinated.

But it definitely stops the rope furring up. Also make sure there are no sharp edges on your bar hole. I had some sharp edges and I'm sure they increased the rate of wear. I just used some Araldite to patch up the inside surface of the bar.
jackgearo
jackgearo
NSW
331 posts
NSW, 331 posts
14 Feb 2009 9:13pm
i just use palmers ultra sticky surf wax.........works great
Meza
Meza
NSW
13 posts
NSW, 13 posts
14 Feb 2009 10:00pm
Silicon spray.
SammyJ
SammyJ
WA
571 posts
WA, 571 posts
14 Feb 2009 8:35pm
Don't worry about it, just go kite. The benefits would not be worth the trouble IMO.....

If you have continual line tangles on setup, then one day when there's no wind run your lines out and individually running them between your fingers a few times will help.
marty72
marty72
QLD
298 posts
QLD, 298 posts
15 Feb 2009 9:37am
Problem with waxing your chicken loop is that stuff like dust, dirt and small sand particles get attached to it, I found silicon spray to work the best
Please Register, or first...
Topics Subscribe Reply

Return To Classic site 😭
Or... let us know if a problem, so we can tweak! 😅