Sorry if you guys with HD GoPro's are on to this, if not check it out...

vimeo.com/groups/goprovideos/videos/16635385

Laurie needs to get them into the Breeze shop

Cheers Uncle Bob.

That is some of the worst footage ive seen. back to the drawing board with that mount setup!

... G'day Guys,

here is a little vid I put togeather with both board mount and a bit of strut mount. I did put the board mount on the bottom with the camera mounted on the bottom but I've yet to attempt to kite with it there for fear of breaking the camera or the mount. Oh, and by the way, the mount on the board is just the bracket you get with the camera box with a couple of holes in it. To stop the camera falling forward I strap it down with some thin rope, not too much engineering thought went into it but so far so good.



cheers for now,

Robbie

Cant edit my post sadly I just got finished modding my mount again.

I took a seam buster took apart a few velcro peices moved them about 4 inches now the camera is not going to move at all when under tension. then I solid tacked down strap so I wont lose the camera. I think this incarnation should work.. the problem before was it could move.

I need to clean up my stitching on the leftside though. I got a really cool sewing machine that did the right side zigzag should hold very well.

When it is rolled up its got velco on velco on velco so its inlikely it will ever come undone.

Its just a matter of getting everything to where its snug the camera was able to wobble. I was already at the beach and no way to modify it there.

That looks like it is on the centre strut. Don't you want the camera rotated thru 90?

Of course pointed in the right direction - at you. But should the camera be parallel to the centre strut or perpendicular? You get right way up shots on one tack and upside down on the other. Puetz gets sideways shots on both tacks, right way round on one transition and upside down on the other . Not sure which is better?

This is what i mean about mounting:



This is yours, which you could change in post:



This is Peutz's



I'm gonna try a strut mount tomorrow and I was going to mount it with the vented helmet strap to the centre strut in the same orientation as Peutz, but although your vid made me pretty nauseaus perhaps your orientation is better. Not sure, but you see the difference?

I see what you mean I would not be able to rotate like that no. However I think the video should be rather stable first attempt is first attempt :)

Supposing the wind works today I will go today.

There was ZERO wind today got up to a whopping 10 KNOTS!!! maybe tomorrow

ZERO wind again today :/ batting for a possible week without wind