KiteCam Rig3

> 10 years ago
Reply
Register to post, see what you've read, and subscribe to topics.
surfingboyo
surfingboyo
QLD
318 posts
QLD, 318 posts
7 Apr 2008 12:03pm
has anyone purchased this kit. it is for mounting a camera to the kite. it look very interesting and fairly cheap...
BoDiddly
BoDiddly
VIC
622 posts
VIC, 622 posts
7 Apr 2008 12:24pm
Got any links/pics to it or whatever?
Kitesplosh
Kitesplosh
VIC
123 posts
VIC, 123 posts
7 Apr 2008 3:40pm
Havent used it but didnt need to. I just followed these instructions with a few modifications:
www.seabreeze.com.au/Members/Content/Articles/Kitesurfing/Setting-Up-a-Kite-Camera_1190269.aspx

Works a treat. BTW for many kites (including Rev and Turbo Deisel) you don't need to glue any velcro onto the kite - just strap the case round the centre strut like a belt and when you blow it up it'll stay in place.

If you want a W30 they don't sell them in Aus any more but you can get them from T-Dimension in Hong Kong (they're on Ebay). The neoprene case you can also get from Ebay (if you want one let me know and I'll dig out the sellers name).


okin
okin
QLD
83 posts
QLD, 83 posts
7 Apr 2008 6:50pm
This one is available in australia and works well.
gopro.com/en/au/
It has its own housing and you can get it for about $200, the quality is good.
It's more of a movie camera than a still although it does take 3 megapixel shots every 5 seconds.
I put a 2 gig card in and it took 56 minutes of constant video.
I have the details for the australian rep but its at work so i'll post it tomorrow.
Skinner
Skinner
ACT
55 posts
ACT, 55 posts
7 Apr 2008 11:23pm
Kitesplosh is right, you can't get them in Aus (checked about 6 different camera shops) and ended up buying from ebay user "Trading_Centre" - needless to say I was relieved when it didnt flood after taking it in the water.

I mounted to my SLE around the centre strut and havent glued it, but I think I might go for some extra bracing because it does move around a little, especially after a decent stack - which is why some of my pics are a bit crooked.

Be careful cutting the neoprene covers as they (the cuts) will tend to grow after some stacks which exacerbates the movement. My solution would be to glue the velcro strip to the back of the case rather than just letting it feed through the gap, although I havent done that yet. Its taken some pretty good crashes so far.

Its a shame the W30 is the only one around with an interval shot mode as its image quality is pretty poor - my 7 year old 3MP camera has better quality (Canon G1), although obviously the pictures arent as big. If the Olympus' had an interval mode I'd definitely recommend them.

I got the neoprene case from ebay seller "atomichh" (in NSW; I got 2 in case I screwed the first one up) and an extra battery from "bestbattery4u" - you'll probably need a spare as they are quite small.

The whole lot cost me around $360 including the spare battery (which included a car charger), 4GB SD card and case. Oh and about $5 for the velcro :)

Sk

EDIT: that Hero video camera looks pretty good actually - I have an ATX2000 (or similar name) marketed by oregon scientific and its quality is pretty ordinary, and it certainly wouldnt go to 30m. It also cost $200.
tobes
tobes
NSW
1000 posts
NSW, 1000 posts
8 Apr 2008 9:54am
A warning to owners of the Pentax W30, when they say waterproof to 10 feet, what they mean is waterproof to 3 feet. I had one recently, made a camrig style pouch for it, sweet, perfect as a kitecam, but took it snorkelling and it flooded in no more than 3 feet of water.
So, if anyone wants a dead camera for spare parts, a battery, charger etc, feel free to PM me an offer.
Skinner
Skinner
ACT
55 posts
ACT, 55 posts
8 Apr 2008 11:25am
MMmmm bummer, sorry to hear about that tobes. I had read a few reviews on dpreview.com about them flooding and thus I was concerned the first time I took mine in the water, but I was only swimming and taking photos of other kiters so it didnt go deep (not that 3 feet is deep!).

I think they do have some disclaimer in the manual saying that it's 10ft of 'static' pressure, and that can rise rapidly by moving it around, or even getting rolled in waves etc.
The same is true for watches - a 100m watch is really only good for 30m, but that doesnt make it any less shonky.

Sk
laurie
laurie
SA
3887 posts
SA, 3887 posts
8 Apr 2008 11:37am
Skinner said...


Be careful cutting the neoprene covers as they (the cuts) will tend to grow after some stacks which exacerbates the movement. My solution would be to glue the velcro strip to the back of the case rather than just letting it feed through the gap, although I havent done that yet. Its taken some pretty good crashes so far.


Agreed. I went to harveys/good guys & ferreted through the bin of camera cases till I found one that was a real snug fit for the W30. Then glued & stitched the velcro to the case and it holds on great ... as Skinner says .. you need a few repairs after some stacks. Also, because the Velcro is slippery (even though tight around the strut) I needed some rubber on the inside to help it grip.

Here's mine:


KiteDevil
KiteDevil
TAS
778 posts
TAS, 778 posts
8 Apr 2008 7:25pm
How about some vids from these rigs?
Don't be shy...
airhead
airhead
WA
814 posts
WA, 814 posts
9 Apr 2008 10:15am
KiteDevil said...

How about some vids from these rigs?
Don't be shy...


www.seabreeze.com.au/forums/topic.asp?TOPIC_ID=32562
Leeds
Leeds
NSW
209 posts
NSW, 209 posts
9 Apr 2008 6:47pm
i made a set up for my olympus 790SW and to get around the fact that it doesnt have an interval mode it does have 2 'shoot and select' modes
one setting takes 5-6 pics really quick great for jumps and tricks most cameras have this and the second setting takes photos every 4-5 sec if you hold down the 'take photo' button so i just wrap 2 wide rubber bands around it and it works

you have to launch and hit the water quick otherwise you have a few plain sand shots but otherwise its good
Scottyyoung
Scottyyoung
NSW
129 posts
NSW, 129 posts
9 Apr 2008 9:30pm
Leeds i have the same camera where abouts is this setting to take 5 photos real quick ..
Also what camera case did u use????
Leeds
Leeds
NSW
209 posts
NSW, 209 posts
9 Apr 2008 10:27pm
hey scotty
if you turn the click wheel until it says SCN
click down until you find shoot and select 1

i got my camera case from ebay

http://cgi.ebay.com.au/Camera-Case-for-Olympus-mju-1030-850-795-790-770-725-SW_W0QQitemZ130212373017QQihZ003QQcategoryZ113386QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

i used canvas glue to stick the velcro to the centre strut and the velcro to the camera case
i can put some pics up if you want or you can check out the how to section
only used it once or twice as im usually too keen to get on the water just have to make sure its aimed at you as i have heaps of photos of water and sand
okin
okin
QLD
83 posts
QLD, 83 posts
10 Apr 2008 12:47pm
Hero camera
gopro.com/en/au/
Australian agent:

tony
v-sport australia
0296798644

or try

competition friction
02 6226 8877
surfingboyo
surfingboyo
QLD
318 posts
QLD, 318 posts
10 Apr 2008 9:14pm
i went on the above website and nothing much looks to relevent to kiting... what do they do.
Please Register, or first...
Topics Subscribe Reply

Return To Classic site 😭
Or... let us know if a problem, so we can tweak! 😅