Hey people, I'm going to buy a gopro soon and like the idea of mounting the camera on the lines. I am wondering if setting up the camera with the line mount will effect the safety system? If your on a four line setup and the camera is mounted on the centre lines (from what I could figure out), if you need to use the safety, the mount looks like it will keep the lines at the same length.

Anyone had any troubles? with the safety or other?

Some of my pics

Yeah, scale is definately a factor with fish-eye. Makes a 3ft day look like ripple riding

I have a newer camrig mount (the one with the green inserts so it does not slide). What I have done is take two inserts out and don't use them. Look at your lines and see which one acts at the safety (if you are running single line safety) then use the green inserts on the opposite line.

This will hold the kite mount in place yet also allow the safety to slide free if you punch out. I as well as a friend have both "punched out" with this set up and the go pro was fine, as well as the kite safety worked the way it was supposed to.

:edit: added sketch...

sunseeker said..

cute shorts