New Release...

> 10 years ago
Reply
Register to post, see what you've read, and subscribe to topics.
BoardGirl
BoardGirl
QLD
248 posts
QLD, 248 posts
16 Jul 2012 9:05pm
Ozone have released their new Kite Control Bar and it looks swish...

Check it out at.... ozonekites.com/water
kiteboy dave
kiteboy dave
QLD
6525 posts
QLD, 6525 posts
22 Jul 2012 9:29pm
Ozone are getting right into racing eh?

Race bar, race bridle set, race line set.

Wouldn't it be nice to be sponsored and have 3 new edges with all of the above?

They don't show what happens to the end of the trim line, does it just flap around or is it fixed?





mattbatty
mattbatty
QLD
14 posts
QLD, 14 posts
23 Jul 2012 1:32pm
What is the purpose of the 2 to 1 trim system? Does anyone know if the North Team riders have a similar custom setup?
Rattlehead
Rattlehead
QLD
555 posts
QLD, 555 posts
23 Jul 2012 1:50pm
mattbatty said...

What is the purpose of the 2 to 1 trim system? Does anyone know if the North Team riders have a similar custom setup?



looks like 4:1 , its 2:1 doubled up with another 2:1 in series making it 4:1,( cascading )

clean looking set up.
Damo
Damo
WA
641 posts
WA, 641 posts
23 Jul 2012 2:41pm
mattbatty said...

What is the purpose of the 2 to 1 trim system? Does anyone know if the North Team riders have a similar custom setup?




Most pro racers are using a custom version of this trim strap. Most of the American guys are calling it "the down haul"

Having the "down haul" allows you to react to all of the small gusts without needing to change you body position by leaning in and thereby reducing the amount of power that you can hang onto. On a race board you are always trying to ride with as much power as you can so not having to lean in to push the bar out or reach the normal trim strap is a big advantage around a race course.

If it is set up properly it also gives you greater control over the angle of attack in your kite. Which helps heaps in very light wind but you need to know what you are doing to take advantage of that.



sorse
sorse
NSW
509 posts
NSW, 509 posts
24 Jul 2012 1:47pm
I think it's harder to set it up nice then it is to use it..
You just have to be good at rising one handed :)
Everything as what Damo wrote above..
archie00
archie00
NSW
138 posts
NSW, 138 posts
24 Jul 2012 7:12pm
I have just changed my bars over to the new Ozone racebar & is very nice setup. Much smoother than I expected and just right amount of depower available. Also the length is spot on - doesn't get wrapped around things.


AGK
AGK
NSW
139 posts
AGK AGK
NSW, 139 posts
24 Jul 2012 8:57pm
Archie is this an upgrade kit or are they complete new bars? I agree they look sweet. I'd think that there shouldn't be any increase in depower it's just longer to allow for the extra cascade. It would change the whole dynamic of the kite to add or take away depower. Is the extra length in the centre lines just accounted by an added strop on the outter lines hence they whole line length would be say 40cm longer?
wdric
wdric
NSW
1625 posts
NSW, 1625 posts
24 Jul 2012 9:47pm
And where are those pictures taken Archie
jordangirdis
jordangirdis
NSW
178 posts
NSW, 178 posts
25 Jul 2012 5:22am
wdric said...

And where are those pictures taken Archie


I suspect Mauritius!
archie00
archie00
NSW
138 posts
NSW, 138 posts
26 Jul 2012 10:39pm
It is a kit with Bar, trim set up, safety and lower section to attach to steering lines. It doesn't come with lines. You move your lines across from your current bar. The lengths are all correct so you can just move current ozone lines across.

Actually have slightly more depower than standard setups - and this comes in very useful when over powered on beam or broad reach when you are wanting to not hit something!

Yes - Mauritius! . Raceboard with me and it travelled well. Can use it here, but need to wait for higher side of tide.
NSW, 4382 posts
29 Jul 2012 1:24pm
kiteboy dave said...

Ozone are getting right into racing eh?

Race bar, race bridle set, race line set.

Wouldn't it be nice to be sponsored and have 3 new edges with all of the above?

They don't show what happens to the end of the trim line, does it just flap around or is it fixed?






The end is not fixed and has no ball or webbing or anything that would create weight and increase the risk of a tangle with any other part of the bar. Even the rope used is especially chosen for the way it grips in the cleat and the way it behaves at speed. The rope and end is usually left on top of the bar within easy reach for the constant trimming that race board riders need.


archie00
archie00
NSW
138 posts
NSW, 138 posts
5 Aug 2012 9:06pm
Some pics of what you get when you buy the new ozone race bar. Used for about 9 sessions - including periods both under and over powered and happy with the setup.




Please Register, or first...
Topics Subscribe Reply

Return To Classic site 😭
Or... let us know if a problem, so we can tweak! 😅