Another one. Basically I am over full blown Race gear on Port Phillip Bay so this is a fast freeride, the bigger bro to the Phil Carbon board.
A revised version of the mono concave /flat V bottom I did on my Blue Slalom board, the shape works and this is just a development of it. The board has a bit more tail rocker and nose rocker, slightly narrower at OFO and thinner in the tail than the Slalom board.
Designed for blasting, cruising on the north end of Port Phillip with it's steep breaking chop/ waves in 7.0 meter plus conditions.
Going to use KA Kults and Koyotes on the Bay this year also for much more cruisy after work sailing than I have been doing on the Race gear. I must be getting old!!!

236X70X114 litres. Single concave to flat at OFO. Flat V either side of concave, constant angle to 700 off then increases forward. Subtle extra V side panels start at 800 off and increase the V forward to lift the rail a touch higher and prevent catching. Scooped out deck with lots of volume placed at and forward of the front straps so floaty when dogging it with the thinner tail making it less prone to bouncing through the jibe.

Board will definitely not be full carbon for a softer ride. I will still keep the Blue slalom for flatter water venues as it is blisteringly fast, just want something tamer for my Bay sailing.

Some quick screen grabs. Concaves not as severe as the look, it,s just the chrome shader