howdy
The vessel i work on is up on the slips ..it is primarily a stink boat ,,,but in its defense it does have a mast ...and a sail ....(somewhere) and is wooden .....the seacock for the cooling system has a small problem with the end of the thread , which i may be able to repair tomorrow by replacing the threaded bolt ......and then refitting the seacock .....Any suggestions as to which type or brand of sealant ....for the base of the seacock flange ,,,it bolts onto a timber fitting inside the hull ,,,and the top flange bolts onto strainer......it has a rubber gasket in reasonable condition....all suggestions welcome ....marine grade silicon was my first thought but a little bit of research has me in a quandry ? The other fly in the pie is it has to be back in the water by high tide thursday so curing time is an issue also.......anybody?