So I put on my shiny new alternator, fired up the Bukh all worked perfect.
I went to the boat yesterday to fix a little oil leak I had from the lift pump,
I started the engine, noting that the amp light came on with the ignition
and went out about 2 seconds after the engine started- perfect. However
when I had finished poking around the lift pump to check the leak I noticed
the amp light gently flickering on and off, an increase in revs made no difference.
So I assume it's because the battery is full and won't accept any more charge.
I have a small solar panel on the battery so it's always fully charged. Should the
amp light flicker like this or is something amiss.???