I posted a Non-skid topic somewhere before (can't find it) but this is a bit more specific.

I need to know how well Kiwi-grip will feather into existing Kiwi-grip.

Here's my scenario. I desperately need to redo the non-skid on my 30' catamaran and I will need to do it on the mooring. If I mask off the areas to be painted I will be able to spread the Kiwi-grip but I won't be able to reach the far side of the deck to use the texture roller or to remove the masking tape. My thoughts are to do maybe the 6-8" inside the tape and leave the middle bare.Then I could remove the masking tape when appropriate and paint the inside area once the outside's cured. My worry is that where the two paint sessions overlap will not mesh in together, leaving an ugly join area.

Has anyone tackled something like this before? If it can't be done like this I could MAYBE reach the outside from the dinghy but trying to roll paint and then remove wet masking tape from a bobbing dinghy sounds very messy and likely to end in tears.

Opinions & suggestions appreciated...

Geoff