Originally my rigging terminal end on top of the mast for the spreader was a bolt ( threaded rod both ends) going though both sides of the mast and swagged eye was bolted to both sides after removing it and seeing the bolt half sawn through by a wire halyard over the years its not going back on
Also who ever rigged it last time
put a bend in the swaged eye and there is no way in hell would i ever do that.
And there was no spacer fitted between the bolt and the inside of the mast which is also a no no as far as I am concerned
I am looking at good suggestions please maybe ball ends or some other better system for the spreader to mast rigging wire