After brushing on the non skid this morning and as the last two years the mizzen raises it angryness at me
I have two problems with it has a crack at the spreaders which I've had plated but still would not fit it
And the rigger is not happy if I hung a wind gen off it. its to light.to surport the wind gen

All of a sudden while sitting in the cockpit some alien spoke to me out of the sky today . Why don't you find a slightly heavier mast section that will support the wind gen which in turn takes away the doubt of the mizzen mast falling down also.
The Mizen mast is 8 meters long around 4 mm thick and around 110 X 85.
Perhaps there maybe a damaged section around that I could cut down to 8 meters or an old mast and use the original spreaders and I already have the rigging screws in 5 mm would just need a mast step and mast head to suit unless the second hand one I find has one
Visually I don't think it would look out of place if I did this.
Any Opinions appreciated

The Crack hidden behind the strengthening plate