Discussed in these Forum posts:

McTavish - EvoII - Review
The board is the Fireball Evolution 2, or EvoII. Essentially it is a more high performance version of the trusted Fireball.

Board Test Location - ThePop, WinkiPop Victoria right next to Bells.
Conditions - 1.5-3.0m South West Swell.

For me, it was like meeting an old friend. In many ways it is very similar to my old 9'1 McTavish Original. As soon as I saw the board, I knew I was going to like it. I waited until today for some decent quality waves to take it out in. The board more than impressed me on every wave. The very first wave was a jacking peaky takeoff and I was in the perfect spot. I didn't expect it to jack quite so much, and it turned into a beautiful smooth late take off, long smooth bottom turn on the rail, and loaded the legs up off the bottom, and the board responded perfectly, plenty of speed and projection.

Another highlight was racing down the line past lowers, coming off the bottom and back off the top about 5 times. So much speed, so much control. Extremely predictable (which is a very good thing!).

It helped that someone had already marked out where to place the Centre fin!

Mine is 9'1 x 22"3/4 x 2"7/8. Pretty standard dimensions. I'm about 88kegs and about 182cm tall, which is roughly bang on 6 foot. I find these dimensions pretty perfect for me. If you're heavier and bigger, you would consider 23 x 3, and vice versa for smaller, consider 22"1/2 or 22"1/4 x 2"5/8. or 2"3/4.

Board Rating - 10 out of 10. 6 Stars out of 5!
Hands down the best 9'0+ Malibu I have ever ridden.
Looking forward to testing it in smaller conditions.

I can't recall if the board is PU or Epoxy. Pretty sure it's PU, but without the Gloss Coat which saves weight.
View topic
Fins
haha I see Lacey here real soon

So what do you guy' use on your logs/single fin boards.

I've got a 10 inch hatchet looks great but having a trouble steering the board any advice,I normally use a standard shape 10 inch which I might give a go on new new board.
View topic
Tint resin artwork
Hi guys,on the wish list is a new log however I'm looking for a classic/retro job on the new keeper.

So the challenge is,who can help me find that special artwork.
View topic
another log

Knowing how much you guys like pics of boards here's one my nephew just got for his 21st. It was made by Dain Thomas from Byron. Its 9-4 x 22 7/8 x 2 3/4.
This is a little different to mine with its very kicked tail rocker. The rest of it is pure traditional log with the flat rocker, 50 / 50 rails and heavy glassing. This should really pivot turn well. The rails are really knifey and it feels really good under the arm.
Check the black / white fin. My nephews obviously stoked with it .












View topic

P1010196

NSW

More like this

Return To Classic site 😭
Or... let us know if a problem, so we can tweak! 😅