Getting the 19ft by 29inch LOW PRESSURE Downwind SUP blank into the shaping bay that good mate Simon Hunnybun is shaping me, I’m just so exited I could pull my pants down and fire a rocket. hahaha
Stay tuned for the finish Produced, It may even come to a shop near YOU.
Cutting hole in the walls so the 19ft blank can fit into the machine shaping bay to be cut.
These two blokes are geniuses Simon and Chris working out how to fit a 19ft blank onto a 12'6'' cutting machine
It can be done putting a 19ft Blank onto a 12'6'' cutting machine
A little bit of hot wiring
Here she comes the birth of LOW PRESSURE UNLIMITED out of her mothers Womb isn't my baby just Beautiful, at 18’6’’ by 28’’ by 7’’ weighing in at 4.9kg I’ll be putting my baby on a strict resin diet, don’t want her weighing more than 14kg
18'6'' x 28'' x 7''
Simon cleaning her rough edges in the nose.
LOW PRESSURE is starting to take shape with no nose lift and very little rocker at 7'' inches thick with a single into double concave slight vee in tail.
Just goto finish of the tail and cut 4'' inches of her Umbilical Cord to make her 18'2''
I guarantee nobody has seen a board like this one in Australia yet.
At 18'2'' in length 28” inches wide and 7” inches thick with no Nose Lift and very little Rocker, this board is more suited for those long training sessions in the canal for races like Molokai when the ocean is not co-operating for those Downwind Paddles (yes I know flat water paddling is as boring as - You need the iPOD) or if the wind is 15 knots or less in small ocean swells this board will be the ants pants, you’ll still be able to paddle this board in 25 knot winds but you’ll need some ability (it’s a big board)
