After trying a few quads in twin and quad mod and seeing the forecast of not much wind yesterday I decided to quad my twin, I want a tighter turning board with a bit more speed in the turns in onshore conditions, I've also sanded 3mm of the tail rocker.

this pic is the boxes wrapped in carbon and then resined into pvc foam ready to be put into the holes I ground and routed into my board yesterday


a dry run to check the fit and positioning of the new boxes


boxes resined in situ


excess resin and filler sanded off ready for the carbon capping layers


carbon capping layers laminated on


sanding coat applied this afternoon


I now just have to sand the above back, apply another sanding coat let it dry and sand that back. Grind out the box holes, spray clear paint, put fins in before next windy day, cross fingers and go sailing.