As I mentioned elsewhere on this forum, I have a very annoying wobble in the wing-to-fuselage connection. I am able to decrease it by wrapping two strips of soda can aluminum over the flat parts of the fuse but it does not eliminate it completely and it makes it hard to pull the wing off the fuse. So I am looking for a more or less permanent solution to this problem. I am thinking about pouring some epoxy mixed with I do not know what exactly into the barrel of the wing and sticking the fuse in there. Extra epoxy will hopefully get squeezed out. Big question is what release agent should I use on the fuse so that I can still pull it out after the resin sets? Any advise would be appreciated.