I have a question on the batten holders in the RSS III.
I am using an X6 mast.
Does changing the position of the rope (3 positions) on the batten holder change the draft of the sail?
After a bit of research and asking a few people, all I got was a few "I am not sure"




The ends of the rope attach to the trailing edge of the cam, they loop around the rear screws of the cam.
If you shorten the length of the batten , use hole number 3, with the same batten tension does this allow the cam to rotate more?

Or do I just put more tension into the batten to get more draft and tighter cams?