Hi All,Hoping someone can point me in the right direction.
After the recent purchase of my Van Der Stadt 24 I have had the back-stay adjustment soft wire break and someone has taken off with the pulleys etc.The boat is currently on a handstand and needs to be moved next month to Nedlands.

Its basically a single line back-stay with a pulley at the base to which a soft wire line is attached to the starboard side runs up to the pulley on the single line then back down to the rope adjuster on the port side (I have attached a rough drawing on how it used to be set up)




Can anyone recommend a good way to re rig this?
I have been looking through the Harken/Ronstan rigging diagrams and there is a similar setup but not the same.

Thanks in advance
Justin