I've been lucky enough to blag this from the undergrowth at the local Land Yachting Club (I think). You'll notice that there's a bit or two missing. This is hopefully going to be a budget build and will be used at the local club at Elvington Airfield, York, UK so will spend most of it's time on concrete. I've got no history for it so don't know how old or how it was set up.
Q1. Wheels. I think the fork is set up for a 16" BMX wheel as the forks are 105mm apart at the bottom, 95mm at the yoke and 254mm axle to yoke (with 10mm gap for the axle). The wheelbase is 2450mm but the rear is only 1380mm wide so I guess it's been cut. The rear is set at 10 degrees. Should I build axles like the Pacific Magic and drop/use upside down to use 4.00x8s and get some ground clearance... or extend the existing rear out to get close to 2000mm and use 125cc motorbike wheels with slicks again on PM axles? (Using on a Airfield/Motorbike Race circuit)
Q2. Pacific Magic or Clemco mast...or windsurfer.
Q3. What rigging set up should I use? Theres an eye at the mast foot and a bolt hole where the black sponge is, and thats it. That should do for now.

Cheers Col


The Fork