My riding has been progressing on the foils. Getting a lot more time on the windwing, some behind the boat, and a little in the surf. Most of my riding on the windwing has been on the 2400. I just started to ride the 1600 this passed weekend on the windwing. Behind the boat and in the surf on the 1600. I have the standard 70cm fuse and the stock uni-tail. I am at 85kg riding a 6'4" sup on the wind wing. A small 5'0 kiteboard behind the boat.

I am getting to the point where the foil is starting to feel like I want a little more maneuverability. I have been reading about everyone going to 60cm fuses, the 232 tail, and the 1550HA front wing.

My question is: is there any kind of order I should go in terms of progressing the maneuverability without killing the stability and fun. Like should I start with switching the tail first. Then once I get the feel of that go to the 1550. And finally switch to a shorter fuse. Or start with the shorter fuse and go reverse order. Or any other combination.

My 232 tail arrived but I haven't tried it yet ,wondering if anyone has used with it the 1550 and +1 shim or should I try 0 shim first ?
interested to hear everyone's experiences with this setup and the 2 different shims.